APR Stage 1 map results and problem

Connorcupra

Registered User
Joined
Sep 18, 2014
Messages
28
Reaction score
10
Points
3
So got my S3 APR mapped today by Ecotune, made very good figures, alot more than i expected with a very good power curve.

One problem is when i was driving home if i was full throttle from say 2500rpm then at 3000(ish) rpm the revs would go up to around 3800 and not move very much with lack of power... but if i feather it over the 3000rpm and go say 50% until 3500rpm then 100% throttle then it pulls to redline no bother at all.. can anyone shed some light on this as i dunno if its clutch issues or ecu getting used to the map??

Power figures from today
 

Attachments

  • Snapchat-3756216843052318117.jpg
    Snapchat-3756216843052318117.jpg
    337.2 KB · Views: 164
Sounds like the clutch slipping to me. If the RPM increases without a proportional increase in speed the clutch is usually the issue.
 
  • Like
Reactions: Boydie
Time to upgrade - get a Sachs organic and while you are there replace the OEM LUK flywheel and wheel bearing

However, you will not get much change from £1000 :(
 

Similar threads

Replies
20
Views
2K
Replies
13
Views
1K
Replies
27
Views
3K
Replies
12
Views
1K
Replies
3
Views
884