Ok, im getting some fantastic help and guidance on this thanks to m rol and others, and I think I have everything I need to do the install now (I will take pictures and write up and guide when I am confident I have everything in place and its correct)
I have a 2015 S3 Sportback with LED clusters and want to move to the dynamic rear clusters
I have purchased
> 4 x Genuine Audi Sportback Dynamic rear cluster s
> This adapter loom: (attached some pictures of it)
https://go.skimresources.com/?id=19...6cf5cddc0e85ba25bb&xjsf=other_click__auxclick [2]
> And from what I can tell from above post the coding is: (and this is the only coding needed?)
Central electronics and then to adaptions. >>> leuchte16blk hla60 and leuchte19hrc31. Change the lasstype to 43 algemein led
So I think I have everything in place to fit. I am assuming all the clusters need a permanent 12v feed and there are some pin alterations / additions. This is what I just have to get firm in my mind as to where they should go?
It would also be useful to get other installers takes on where they drew their permanent 12v feed from
Thanks in advance and stay safe