vcds

  1. L

    Vcds interface not found!

    Due to cost and lack of using vcds i brought a clone disc and works fine but when i ever i install it on a different laptop i always get the interface not found error. I had someone look at it amd they got it to work. Any ideas? Both work fine once set up. Thanks
  2. A

    AMI retrofit help: AMI installed, MMI software updated, still not recognised?

    Hi All, having a bit of a headache in my attempt to get music over bluetooth into my 2010 A8. My car's original set up: Two units in the glovebox: A CD changer A SATNAV/DVD/SDcard unit No AMI socket in either the glovebox or the armrest. I believe the car is too early for AMI. MMI is 3G High...
  3. I

    Need help coding Comfort module correctly A4 B9

    Hi there, I tried to retrofit a reverse camera into my Audi A4 Avant B9 and at the coding part something went wrong and my DRL & Front Turn Signals stopped working, as well as the PDC system. I guess that the problem is related to the codification of the Comfort Module. As the only thing i...
  4. S

    Enabling Audi Sound System

    Hi, I have retrofitted the Audi Sound System sub and centre speaker to my 8V PFL and I have coded them in using my genuine copy of VCDS. However, I can’t see the sub controls in my MMI and I have been told that I also need to upload a profile using VCP to complete the retrofit. Is there...
  5. Asahi

    Car starts then stalls [VCDS READOUT inc]

    Hi all, I'll keep it brief. Last week during this phase of bitterly cold weather my car wouldn't start. The car would start for a few seconds then stall and the glow plug light would constantly flash. I just assumed it was that and replaced all four glow plugs, some of which did measure high...
    • Asahi
    • Thread
    • ecu & immobiliser electrical fault glow plug light glow plug warning light glow plugs ignition non starter vcds
    • Replies: 5
    • Forum: A4/A4 cabriolet/S4 (B6 chassis)
  6. Audi98

    Cruise control retrofit

    Hi is anyone able to code in Cruise control in a 2010 Audi A3 in the W Midlands area?
    • Audi98
    • Thread
    • a3 2.0 tdi audi cruise control parts retrofit retrofit cruise control vcds vcds coding west midlands
    • Replies: 10
    • Forum: A3/S3/Sportback (8P Chassis)
  7. V

    Audi A4 2014 optical illustration

    Hi guys. I own Audi A4 B8.5 2014 and have just acoustic rear parking sensors and I want to enable optical illustration. I tried with VCDS, module 10 and module 76 but I get no response from controller error. Can you help me? I read that that functions are moved in other modules..
  8. a4b6awx

    AWX A4 B6 1.9 tdi Manual Power Loss/ESP Light (ABS) Juddering at 2-3k rpm with VCDS Scans

    Hi Guys, advice needed; Fault initially started after having the oil and gunk washed off from the underside of the car. It was washed off lightly with degreaser and a hose, not a pressure washer, but may have got somewhere and shorted/damaged sensor? The car was juddering with ESP light...
    • a4b6awx
    • Thread
    • awx 1.9 tdi a4 b6 brake light crank sensor engine speed sender esp esp fault g85 mfsw cc steering control module juddering power loss vcds
    • Replies: 4
    • Forum: A4/A4 cabriolet/S4 (B6 chassis)
  9. A

    VCP owner required near me East London??

    Hello everyone, I have recently used VCDs to enable and configure adaptions for TSR my Audi A7 2015 face-lift with MIB2. The car has advanced tech pack, ACC with presense, Lane/side assist. Having followed a well written guide to make sure I have the correct parts etc, I was able to complete...
    • Ash_174u
    • Thread
    • acc audi a7 mib2 mmi traffic sign recognition tsr vcds vcp
    • Replies: 6
    • Forum: A7/S7/RS7 forum
  10. 420S3

    S3 8V drive select not available

    Hi all, I have a audi s3 8v that is missing the drive select feature, its greyed out on screen and the Drive Select button doesn't do anything. I took it to a coding guy who tried fixing it but couldn't as he said the mmi has been refitted and will need flashing to s3 firmware. Is there...
  11. FPSUsername

    VCDS error code 01044

    Hello, Since I scanned this Audi A3 8P Cabrio, I noticed one issue that I can not seem to fix (it could be that the garage messed up some of the codings when the previous owner was upgrading the radio). I have seen people getting the error code 01044 regarding their radio, but I don't see any...
  12. Nick-1964

    Wanted Wanted Genuine VCDS Cable

    I want a cheap and cheerful VCDS cable for occasional use to use on my older Audi cars (2009 A3 and 2007 TTR). Not looking to spend more than about £100. Loads available online but not sure how to identify genuine one from the fakes so thought here would be the safest place to buy.!
  13. Mastachaz

    VCDS Coding on s3 2018 - London

    Hi looking for someone who can activate for me powerfolding mirrors and few other bits on s3 18 plate im based in sw16 london happy to travel and off course pay :) thanks
  14. A

    VCDS Devon

    Hi All, New to this forum, recently bought an 8P3 2011 2.0 tfsi quattro sline. The previous owner managed to put up with both driver and passenger seats having problems. I whipped out the seats and fixed the issues easily however, now the airbag light has come on... Does anyone in the Devon...
  15. M

    Mirror Dip without Memory Seats

    Hi everyone. This may have been asked and answered in the past, but i have been searching for a couple of days and i cant seem to find anything useful. I have a 2007 A4 B7, no electric rear windows, no folding mirrors and no memory seats. My question is, can i code my passenger side mirror to...
  16. theViTALiTY

    Unable to turn off Leaving Home lights.

    Hi mates, first post here so i guess it has to be a problem of sorts :/ I own the Audi A3 2009 2.0 TDI 140HP S-Line facelift. I recently bought the VCDS and was about to do my first coding which was CH lights. Car has the bi-xenon headlights installed but no auto lights, since it has no light...
  17. G

    ECU swap using VCDS and 7 digit SKC.

    Hi All, I am new to this forum in the hope someone can help please. I am using my VCDS to swap a used ECU into an 06 Bentley Continental GT, IMMO 3. I have the pin numbers for both the old and new(used) ECU's. When I get to the adaptation bit it only gives me an option for the SKC 7 digit code...
  18. B

    Facelift Exhaust valve opening RPM in "normal"

    Hi Does anyone know if the current 3800 RPM that opens the valves under "normal" mode can be changed via VCDS or if this is part of the mapping tables? I have mine de-cat and sport exhaust - it would be nice to raise it to e.g. 4200 before open to allow for a bit of fun driving without people...
  19. shomi951

    Concert to BNS 5.0 low line

    Hello, I have a question regarding this retrofit upgrade to BNS 5.0, I have successfully installed, also I was added GPS antenna from aliexpress. But I don't coding anything, BNS 5.0 still working I don't have maps for my country and I don't have tested navigation yet. If I need something to...
  20. A

    Audi A1 Bi Xenons Incorrect Beam Pattern

    Hey guys, i've seen it posted on here before but no one ever really, from what i can see, ended up giving a conclusive answer to the question. I've had bi xenons installed (retrofitted) onto my car and the beam pattern is incorrect, showing as left hand drive. i was wondering how i change it...
    • A1Blake
    • Thread
    • asap beam bi xenon coding headlight help pattern retrofit vagcom vcds
    • Replies: 0
    • Forum: A1 forum
Top
Back