Morning All,
Scanned my car last night and this popped up has anyone seen this before.
Address 01: Engine
Controller: 8N0 906 018 BH
Component: 1.8L R4/5VT 0001
Coding: 10710
Shop #: WSC 13365
1 Fault Found:
16395 - Bank 1: Camshaft A (Intake): ****** Setpoint not Reached (Over-Advanced)
P0011 - 35-10 - - - Intermittent
Readiness: 0000 0000
Digging around Ross tech I get the explanation:
16395/P0011/000017 - Bank 1: Camshaft A (Intake): ****** Setpoint not Reached (Over-Advanced)
Possible Symptoms
Also does anyone know how easy it is to change the N205 valve? - I have had a look around and searched but can find very little on the valve?
shall I book her into the garage and get her looked at.
Scanned my car last night and this popped up has anyone seen this before.
Address 01: Engine
Controller: 8N0 906 018 BH
Component: 1.8L R4/5VT 0001
Coding: 10710
Shop #: WSC 13365
1 Fault Found:
16395 - Bank 1: Camshaft A (Intake): ****** Setpoint not Reached (Over-Advanced)
P0011 - 35-10 - - - Intermittent
Readiness: 0000 0000
Digging around Ross tech I get the explanation:
16395/P0011/000017 - Bank 1: Camshaft A (Intake): ****** Setpoint not Reached (Over-Advanced)
Possible Symptoms
- Power Loss
- Camshaft Adjustment Valve 1 (N205) faulty
- Fuel Pump Relay (J17) faulty
- Check Camshaft Adjustment Valve 1 (N205)
- Check Fuel Pump Relay (J17)
Also does anyone know how easy it is to change the N205 valve? - I have had a look around and searched but can find very little on the valve?
shall I book her into the garage and get her looked at.