- Joined
- Aug 14, 2017
- Messages
- 146
- Reaction score
- 66
- Points
- 28
- Age
- 33
So I’ve been looking at replacing the suspension in my 2010 s3, and lower the front end in the process.
I bagged some bilstein b8 rear shocks off here and Then some eibach pro front springs from dpm performance.
I heard from dpm you need to shorten bilstein b8 front shocks by 20mm to fit the springs onto the front *HOWEVER* the company I got them from *AND* bilstein HQ themselves both said this wasn’t required....
Me being me should have listened to dpm but didn’t :/ and now I have a set of shocks and springs that looks like this ....
I bagged some bilstein b8 rear shocks off here and Then some eibach pro front springs from dpm performance.
I heard from dpm you need to shorten bilstein b8 front shocks by 20mm to fit the springs onto the front *HOWEVER* the company I got them from *AND* bilstein HQ themselves both said this wasn’t required....
Me being me should have listened to dpm but didn’t :/ and now I have a set of shocks and springs that looks like this ....