They will be up in the next few weeks@RedS3Reilly Very impressive. I'm only at Stage 1 but your development has been really encouraging. Can't wait to see your vids from Crail
Stage3 500hp
- Thread starter RedRS3Reilly
- Start date
I think your right guys,I think it is down to permissions
I'll try another way of uploading
Go to Instagram look at my page I can load the videos there, some reason I'm unable to load them here Insta is ry243
So you are running 640nm on stock DSG clutch? Only APR Software?
Gesendet von iPhone mit Tapatalk
Gesendet von iPhone mit Tapatalk
Any can the tuners really say that the stock engine has no Problem with 500 hp?
Gesendet von iPhone mit Tapatalk
Gesendet von iPhone mit Tapatalk
- Joined
- Dec 3, 2008
- Messages
- 10,887
- Reaction score
- 4,888
- Points
- 113
Hi there...glad your car is back in action.
@pepperisback it's torque that's going to cause serious problems,not outright BHP.
Most of the available hybrids aren't putting out torque levels that are likely to bend rods or break gearboxes.
@RedS3Reilly ...please...remind me which DSG box the 8V S3 uses....I know from the guys at Storm,that the DQ500 will cope with over 800Nm(or 600+lbs) on the stock clutches with appropriate software.
@pepperisback it's torque that's going to cause serious problems,not outright BHP.
Most of the available hybrids aren't putting out torque levels that are likely to bend rods or break gearboxes.
@RedS3Reilly ...please...remind me which DSG box the 8V S3 uses....I know from the guys at Storm,that the DQ500 will cope with over 800Nm(or 600+lbs) on the stock clutches with appropriate software.
As far as I can see from The ETKA Parts Catalogue the highest rated DSG used in an A3 is the DQ400 which is used for hybrids. The DQ250 seems to be the one used in the S3 as it's for four-wheel drive.
- Joined
- Feb 16, 2015
- Messages
- 6,006
- Reaction score
- 7,311
- Points
- 113
