If you can find the number and google it, that should help. I know of no way to know without the number and either someone that knows, or googlage
If you have an AUM then yours is ME7.5 (wideband)
VCDS will read the ECU number (starting 8L0 or 06A) when you connect to the controller
<tuffty/>
What car, year and engine code you got?
As your user name is a3t id say it's an me3.8
Simplest way is if it has electronic throttle or not.
M3.8 cars are all cable throttle. ME7 are all electronic.
Not all... Ibizas are DBW but ME3.8
EDIT... actually... I need to check that as I can't remember!!!... Bill will confirm but I seem to remember that the Ibiza ECU was different for whatever reason but I could be wrong as I am old and my brain only works sporadically
If its AUM its ME7, AGU is ME3.xx
<tuffty/>
no mate, ibiza's like silver thing, is me7
dbw=me7 in 1.8t terms typically
simples
Yes, all s3's are me7, though some early ones arnt wideband. A BAM will be me7.5 I think
Thanks guys.
I didn't realize that engine code would determine what the ecu would be on.
I would still be interested to know what one out of the 8L0 or 06A would be me7?
Would you be able to up load the same gerneick map off a apy late 2000 on to a bam ecu?
How come out of intrest? Is it just down to codes on the ecu? Say like on the old fiesta turbos for instance, the difference between OFAC and OFAB ecu's
APY is 512kb narrow band ECU and BAM is wide band 1mb ECU
<tuffty/>
Cable throttle motronic 3.-.- ecu numbers are all 06a 906 018 with a different letter/s at the end.
DBW with 1 narrowband lambda- All ME7. (1/2 meg ecus)
DBW with 2 lambda sensors ( 1 wide band)- ME7.5 (1meg ecus)
Some ME7 came with post cat sensors too
<tuffty/>
The apy in question is DBW with ESP but no post cat sensor, it has a gerneick revo stage 2 map that's why I wondered if the file could be copied and used on the bam
Ah really? What engines had that setup tufty? Ayp Ibiza?
Ah really? What engines had that setup tufty? Ayp Ibiza?
The apy in question is DBW with ESP but no post cat sensor, it has a gerneick revo stage 2 map that's why I wondered if the file could be copied and used on the bam