Power, mods,specs, remapper and graphs!

Cambaines

Registered User
Would love to know what everyone's running so here is a thread for everyone to post there car spec, remapper and power gains for everyone too see and compare parts and tuners!

:redrs4:

Use this Legend;

Car: Audi A3 2006 2.0 tfsi quattro

Parts: Miltek Turbo back decat non res, Ramair Widepipe CAI, Rev D DV

Remap: Stage 2

Remap Company: Unicorn Developments

BHP: 280

Torque: 313lb/ft

Graph:

27f60d57f5c577d65f947dfce77563ab.jpg


@Sandra
 

S3Alex

Rarely neutral
Gold Supporter
Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.
 
Last edited:

MICHAEL PARKER

S3 Sportback
Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.


Is that all lol ?
 

-Ju-

Well-Known Member
VCDS Map User
Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.
Thread killer lol!
 

S3Alex

Rarely neutral
Gold Supporter
Thread killer lol!

Sorry.....I didn't intend it to be any sort of thread killer,and really hope it doesn't come out that way.

I took Cam's invite at face value,and hope the parts and tuner list is useful.
If every one of us who's tuned their car posts here,then there's something for everyone,and hopefully from all over the country.
 

-Ju-

Well-Known Member
VCDS Map User
Haha just teasing Alex!

Car: Audi S3 S-tronic

Mods: Milltek full system with sports cat, Revo camcoat CAI, APR hpfp, GFB DV+, APR 2+ map

Suspension mods: KW clubsport coilovers, H&R front & rear anti roll bars, WALK kit

Power: absolutely no idea but stage 2 was way quicker than stock and 2+ is way quicker than stage 2!
 

Cambaines

Registered User
My specs good enough for me, just managed to set my bakes on fire! Couldn't imagine what a stage 2 s3 would be like never mind Alex's!
 

MICHAEL PARKER

S3 Sportback
I am getting there

Audi S3 manual facelift
Bcs turbo back exhaust system
Autotech internals HPFP
Gfb dv+
Neuspeed cai
H&R 15mm spacer kit rear
H&R 12mm spacer kit front
TTS engine cover

So far but the list will get bigger , R tech stage 2+ map next .
 

MICHAEL PARKER

S3 Sportback
I am getting there

Audi S3 manual facelift
Bcs turbo back exhaust system
Autotech internals HPFP
Gfb dv+
Neuspeed cai
H&R 15mm spacer kit rear
H&R 12mm spacer kit front
TTS engine cover
RS4 fuel valve
So far but the list will get bigger , R tech stage 2+ map next .
 

Carterleeds

Registered User
hi guys hoping you could help...

i have a a3 2.0tfsi with ko4 conversion so needing a remap...

what options do i have as im in leeds.....

1. im not sure how far i can drive it on the stock k03 map to get it maped...

2. is there any portable maps i can buy like superchips?! i have contacted them but they cannot help....

3. has anyone else done this conversion and have a map i could possibly copy with intent to purchase of course lol...

any help or advise welcomed
 

Rick @ Unicorn Motor Dev.

Site Sponsor
Site Sponsor
hi guys hoping you could help...

i have a a3 2.0tfsi with ko4 conversion so needing a remap...

what options do i have as im in leeds.....

1. im not sure how far i can drive it on the stock k03 map to get it maped...

2. is there any portable maps i can buy like superchips?! i have contacted them but they cannot help....

3. has anyone else done this conversion and have a map i could possibly copy with intent to purchase of course lol...

any help or advise welcomed


We are in Stockport, no problem to do this.

Rick
 

BurgoS3

Active Member
VCDS Map User
2011 Audi S3

Mods
Revo CAI, GFB+DV, Full Milteksports cat non res exhaust, Loba HPFP, Forge Catch can, yellow speed BBK, Front and rear H&R anti roll bars, whiteline anti lift kit, RS4 fuel return valve, R8 coil pack, TTS engine cover, Sachs performance SMF and clutch kit, ST sport suspension Kit, Porche oil & coolant caps, H&R 12 &15mm spacers (awaiting delivery)

Thinking of getting a TTE420 next, what other hardware would I need?

Custom stage 2 + remap by rick at Unicorn motor developments
363BHP
372ft.lbs

image.jpeg
 

S3Alex

Rarely neutral
Gold Supporter
2011 Audi S3

Mods
Revo CAI, GFB+DV, Full Milteksports cat non res exhaust, Loba HPFP, Forge Catch can, yellow speed BBK, Front and rear H&R anti roll bars, whiteline anti lift kit, RS4 fuel return valve, R8 coil pack, TTS engine cover, Sachs performance SMF and clutch kit, ST sport suspension Kit, Porche oil & coolant caps, H&R 12 &15mm spacers (awaiting delivery)

Thinking of getting a TTE420 next, what other hardware would I need?

Custom stage 2 + remap by rick at Unicorn motor developments
363BHP
372ft.lbs

View attachment 98763

Rick is recommending RS3 injectors I think,and an RS LPFP.

Speak to him and I'm sure he'll sort it for you.
 

Compkiler

Registered User
Wish I still had mine :-( I wonder if someone here has it?
 

Moxy89

Registered User
Car was mapped again today by Rabbid

Pulled 326.2 stage 2 however due to Dsg it kept up shifting after my Dsg map he reckon more 340bhp so the box map is coming in a couple of weeks
 

Mark A Greenwood

Registered User
Please excuse me if this is in the wrong section.
I like the look of how the exhausts on the S3 2013 are
maxresdefault.jpg


Ive been looking at what options i have to achieve this on my S2 09 3 door. Can anyone help and point me in the right direction please?
 

S3Alex

Rarely neutral
Gold Supporter
Please excuse me if this is in the wrong section.
I like the look of how the exhausts on the S3 2013 are
maxresdefault.jpg


Ive been looking at what options i have to achieve this on my S2 09 3 door. Can anyone help and point me in the right direction please?

Go to BCS.

They can make anything you want exhaust-wise.
Speak to Nige and Dave.

We went through the 2 and 4 pipe options for mine and stuck with 2 but they can do the lot.

 

DomH

Registered User
I can vouch for Ricks handwork, he mapped my 1.8 TFSI A3 and it was an amazing difference.

Might see if he wants to have a play with an S1
 
  • Like
Reactions: S.

S11M

Registered User
I can vouch for Ricks handwork, he mapped my 1.8 TFSI A3 and it was an amazing difference.

Might see if he wants to have a play with an S1

DomH

Was it a 8P 1.8tfsi you had remapped? What stage did you go for and what gains did you get? Was it aggressive or smooth? Did you have any mods or was it standard?
 
Top