Power, mods,specs, remapper and graphs!

[Cambaines]

Would love to know what everyone's running so here is a thread for everyone to post there car spec, remapper and power gains for everyone too see and compare parts and tuners!



Use this Legend;

Car: Audi A3 2006 2.0 tfsi quattro

Parts: Miltek Turbo back decat non res, Ramair Widepipe CAI, Rev D DV

Remap: Stage 2

Remap Company: Unicorn Developments

BHP: 280

Torque: 313lb/ft

Graph:

@Sandra

 

[RS4K]

Car: Audi S3 2010 Sportback

Parts: Resonator Delete, Forge Twintake, Rev G DV

Remap: Stage 1

Remap Company: Revo

BHP: Around 300+

Torque: TBC

Graph: Not dyno'd yet

 

[S3Alex]

Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.

 

[Cambaines]

@S3Alex I've wanted to see that list since being on this forum... Wow

 

[S3Alex]

@S3Alex I've wanted to see that list since being on this forum... Wow

Thank you.

Every time I see it,it makes my wallet wince.

 

[Jake 61]

Thank you.

Every time I see it,it makes my wallet wince.

Any time I see it, it makes my wallet wince in sympathy.....!

 

[MICHAEL PARKER]

Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.

Is that all lol ?

 

[S3Alex]

Is that all lol ?

It's as much as I thought most people would have the stamina for.....
But.....it is a decent one-stop shop for a parts list!

 

[kash_v]

@S3Alex wins

 

[-Ju-]

Good idea,followed by long post alert!

Car: Audi S3 2008

Parts:
ITG CAI
Boulekos inlet manifold with extra injector rail
Autotech HPFP internals
USP Motorsports auxiliary LPFP
AEM WMI system
Ferrea valvetrain
PEC rods
Wossner LC pistons
Updated bearing shells and gearbox bearings
Nortech exhaust manifold
Owen Developments GTX3582 M-Spec turbo
Syvecs ECU and software

H&R ARBs
kW Clubsport suspension and adjustable topmounts
Quaife diff
Haldex controller
AP 6pot front brakes
Forge 4pot rears

Tuners:
AMDTuning
Storm Developments
Syvecs

Parts from:
Integrated Engineering
USP Motorsports
PEC
Boulekos Dynamic
Nortech
Owen Developments
Syvecs

Just about made 260bhp when bought.

Now 550bhp/540lbs @ 1.9bar
600bhp+ @ 2.1bar.

Thread killer lol!

 

[S3Alex]

Thread killer lol!

Sorry.....I didn't intend it to be any sort of thread killer,and really hope it doesn't come out that way.

I took Cam's invite at face value,and hope the parts and tuner list is useful.
If every one of us who's tuned their car posts here,then there's something for everyone,and hopefully from all over the country.

 

[Cambaines]

100% not a thread killer! This is the kind of stuff I want to be seeing! I really want to see what other people are achieving with a similar spec to me!

 

[-Ju-]

Haha just teasing Alex!

Car: Audi S3 S-tronic

Mods: Milltek full system with sports cat, Revo camcoat CAI, APR hpfp, GFB DV+, APR 2+ map

Suspension mods: KW clubsport coilovers, H&R front & rear anti roll bars, WALK kit

Power: absolutely no idea but stage 2 was way quicker than stock and 2+ is way quicker than stage 2!

 

[Cambaines]

My specs good enough for me, just managed to set my bakes on fire! Couldn't imagine what a stage 2 s3 would be like never mind Alex's!

 

[MICHAEL PARKER]

I am getting there

Audi S3 manual facelift
Bcs turbo back exhaust system
Autotech internals HPFP
Gfb dv+
Neuspeed cai
H&R 15mm spacer kit rear
H&R 12mm spacer kit front
TTS engine cover

So far but the list will get bigger , R tech stage 2+ map next .

 

[Hookmonster]

S3 2010 sportback
Full turbo back , titanium wrapped BCS Powervalve exhaust system
Revo intake
Loba hpfp
Tts engine cover and bolts
Rs4 fuel valve
Helix organic clutch
R-Tech stage 2+ custom map 370bhp 390ld torque
Continental contisport contact 5 tyres

 

[Rick @ Unicorn Motor Dev.]

Today, S3 8P 2011 DSG, no mods. Std 263bhp 274lbft. Stage 1 305bhp 330lbft.

Rick

 

[MICHAEL PARKER]

I am getting there

Audi S3 manual facelift
Bcs turbo back exhaust system
Autotech internals HPFP
Gfb dv+
Neuspeed cai
H&R 15mm spacer kit rear
H&R 12mm spacer kit front
TTS engine cover
RS4 fuel valve
So far but the list will get bigger , R tech stage 2+ map next .

 

[Carterleeds]

hi guys hoping you could help...

i have a a3 2.0tfsi with ko4 conversion so needing a remap...

what options do i have as im in leeds.....

1. im not sure how far i can drive it on the stock k03 map to get it maped...

2. is there any portable maps i can buy like superchips?! i have contacted them but they cannot help....

3. has anyone else done this conversion and have a map i could possibly copy with intent to purchase of course lol...

any help or advise welcomed

 

[kash_v]

@Carterleeds give Rtech a call.

 

[Moxy89]

2012 Audi S3

Mods
Forge twin take
Miltek non res cat back
Full custom map.... Pulled 318.7bhp stage 2 is happening 19th August so will update

 

[Rick @ Unicorn Motor Dev.]

hi guys hoping you could help...

i have a a3 2.0tfsi with ko4 conversion so needing a remap...

what options do i have as im in leeds.....

1. im not sure how far i can drive it on the stock k03 map to get it maped...

2. is there any portable maps i can buy like superchips?! i have contacted them but they cannot help....

3. has anyone else done this conversion and have a map i could possibly copy with intent to purchase of course lol...

any help or advise welcomed

We are in Stockport, no problem to do this.

Rick

 

[BurgoS3]

2011 Audi S3

Mods
Revo CAI, GFB+DV, Full Milteksports cat non res exhaust, Loba HPFP, Forge Catch can, yellow speed BBK, Front and rear H&R anti roll bars, whiteline anti lift kit, RS4 fuel return valve, R8 coil pack, TTS engine cover, Sachs performance SMF and clutch kit, ST sport suspension Kit, Porche oil & coolant caps, H&R 12 &15mm spacers (awaiting delivery)

Thinking of getting a TTE420 next, what other hardware would I need?

Custom stage 2 + remap by rick at Unicorn motor developments
363BHP
372ft.lbs

 

[S3Alex]

2011 Audi S3

Mods
Revo CAI, GFB+DV, Full Milteksports cat non res exhaust, Loba HPFP, Forge Catch can, yellow speed BBK, Front and rear H&R anti roll bars, whiteline anti lift kit, RS4 fuel return valve, R8 coil pack, TTS engine cover, Sachs performance SMF and clutch kit, ST sport suspension Kit, Porche oil & coolant caps, H&R 12 &15mm spacers (awaiting delivery)

Thinking of getting a TTE420 next, what other hardware would I need?

Custom stage 2 + remap by rick at Unicorn motor developments
363BHP
372ft.lbs

View attachment 98763

Rick is recommending RS3 injectors I think,and an RS LPFP.

Speak to him and I'm sure he'll sort it for you.

 

[BurgoS3]

He does know his stuff and I'll be seeing him in a couple of weeks for a power run/ put my mind at rest the cars performing as it should

 

[BurgoS3]

Do you know if it's the 8p or 8v rs3 injectors

 

[S3Alex]

Do you know if it's the 8p or 8v rs3 injectors

Best to ask Rick...I'm using a totally different setup.

 

[Compkiler]

Wish I still had mine :-( I wonder if someone here has it?

 

[Moxy89]

Car was mapped again today by Rabbid

Pulled 326.2 stage 2 however due to Dsg it kept up shifting after my Dsg map he reckon more 340bhp so the box map is coming in a couple of weeks

 

[Mark A Greenwood]

Please excuse me if this is in the wrong section.
I like the look of how the exhausts on the S3 2013 are

Ive been looking at what options i have to achieve this on my S2 09 3 door. Can anyone help and point me in the right direction please?

 

[S3Alex]

Please excuse me if this is in the wrong section.
I like the look of how the exhausts on the S3 2013 are

Ive been looking at what options i have to achieve this on my S2 09 3 door. Can anyone help and point me in the right direction please?

Go to BCS.

They can make anything you want exhaust-wise.
Speak to Nige and Dave.

We went through the 2 and 4 pipe options for mine and stuck with 2 but they can do the lot.

 

[Mark A Greenwood]

Thanks

 

[s5joe]

Rick done a stage 1 on mine was 295bhp std and 345bhp mapped even Rick was baffled with it as it had no mods at all

 

[GMballistic]

Rick done a stage 1 on mine was 295bhp std and 345bhp mapped even Rick was baffled with it as it had no mods at all

Sounds like a great result.

What year & model is it though?

 

[s5joe]

Sounds like a great result.

What year & model is it though?

It's a 2010 sport back S3

 

[Hookmonster]

Sounds like audi put a s3 8v engine in by mistake

 

[GMballistic]

Sounds like audi put a s3 8v engine in by mistake

Lol.

 

[Rick @ Unicorn Motor Dev.]

That car was an odd ball. I was convinced it was mapped when i first ran it.

 

[DomH]

I can vouch for Ricks handwork, he mapped my 1.8 TFSI A3 and it was an amazing difference.

Might see if he wants to have a play with an S1

 

[S11M]

I can vouch for Ricks handwork, he mapped my 1.8 TFSI A3 and it was an amazing difference.

Might see if he wants to have a play with an S1

DomH

Was it a 8P 1.8tfsi you had remapped? What stage did you go for and what gains did you get? Was it aggressive or smooth? Did you have any mods or was it standard?