dannyboy1985
Registered User
This is the way to wire your halogen pre FL to the new dynamic FL lights. You need to run 2 wires on each side from the outers to the inners. One for indicators and one for tail lamps along with one power wire for the dynamic indicator.
You will need the updated connectors for the outers and for the inners. I used model aircraft servo connectors for my inners with pre-made leads cheap and easy. You need 4 as they are 3pin each.
Note: The lamps and connectors are numbered so it’s not difficult to pair up.
Note2: After wiring lights and before coding. Lights will show fogs (dim) and brake lights (dim) brightening when selected. After coding brake and fog will be off until selected.
Credit the the other conversion threads for base info!
I will update this as I think of other bits...
Outer Lamp Left
Pin 1 – Ground Brown
Pin 2 - Tail lamp (taken from IL pin 2)
Pin 3 - Brake lamp Blue
Pin 4 - Turn signal lamp Blue/Yellow (taken to IL pin 3)
Pin 5 - live power dynamic indicator
Pin 6 – Not used
Inner Lamp Left
Pin 1 – Ground Brown
Pin 2 - Tail lamp Brown/Red (taken to OL pin 2)
Pin 3 - Turn signal (taken from OL pin 4)
Pin 4 - Fog lamp Red/White
Pin 5 - Reverse lamp Black/Blue
Pin 6 - live power dynamic indicator
Outer Lamp Right
Pin 1 – Ground Brown
Pin 2 - Tail lamp (taken from IL pin 2)
Pin 3 - Brake lamp Green/Brown
Pin 4 - Turn signal lamp Mauve (taken to IL pin 3)
Pin 5 - live power dynamic indicator
Pin 6 – Not used
Inner Lamp Right
Pin 1 – Ground Brown
Pin 2 - Tail lamp Brown/Yellow (taken to OL pin 2)
Pin 3 - Turn signal lamp (taken from OL pin 4)
Pin 4 - Fog lamp Green/Yellow
Pin 5 - Reverse lamp Green/Red
Pin 6 - live power Needed to make dynamic indicator work
You will need the updated connectors for the outers and for the inners. I used model aircraft servo connectors for my inners with pre-made leads cheap and easy. You need 4 as they are 3pin each.
Note: The lamps and connectors are numbered so it’s not difficult to pair up.
Note2: After wiring lights and before coding. Lights will show fogs (dim) and brake lights (dim) brightening when selected. After coding brake and fog will be off until selected.
Credit the the other conversion threads for base info!
I will update this as I think of other bits...
Outer Lamp Left
Pin 1 – Ground Brown
Pin 2 - Tail lamp (taken from IL pin 2)
Pin 3 - Brake lamp Blue
Pin 4 - Turn signal lamp Blue/Yellow (taken to IL pin 3)
Pin 5 - live power dynamic indicator
Pin 6 – Not used
Inner Lamp Left
Pin 1 – Ground Brown
Pin 2 - Tail lamp Brown/Red (taken to OL pin 2)
Pin 3 - Turn signal (taken from OL pin 4)
Pin 4 - Fog lamp Red/White
Pin 5 - Reverse lamp Black/Blue
Pin 6 - live power dynamic indicator
Outer Lamp Right
Pin 1 – Ground Brown
Pin 2 - Tail lamp (taken from IL pin 2)
Pin 3 - Brake lamp Green/Brown
Pin 4 - Turn signal lamp Mauve (taken to IL pin 3)
Pin 5 - live power dynamic indicator
Pin 6 – Not used
Inner Lamp Right
Pin 1 – Ground Brown
Pin 2 - Tail lamp Brown/Yellow (taken to OL pin 2)
Pin 3 - Turn signal lamp (taken from OL pin 4)
Pin 4 - Fog lamp Green/Yellow
Pin 5 - Reverse lamp Green/Red
Pin 6 - live power Needed to make dynamic indicator work
Last edited: