So I want to give changing me rear shocks and top mounts a stab on my own.
Never done it before but have watched, is it just a case of:
1. Undo 2 bolts up top on top mount
2. Undo third bolt on bottom of Shock
3. Remove shock with top mount
4. Remove Top mount from the (heald on by a nut i think?)
5. Remove dust cover from old shock and transfer to new shock
6. Fix new topmount to new shock and do up nut
7. put bolts all back in
Am I missing any tools i might need? I dont have an impact gun but am getting a new tool kit this week with 3/8, 1/2 ratchet spanners and up to 23mm sockets.
* Ratchet sockets up to 23mm
* Spanners up to 17mm and long reach sockets up to the same
* Low entry jack(need to get axle stands)
* Patience
Never done it before but have watched, is it just a case of:
1. Undo 2 bolts up top on top mount
2. Undo third bolt on bottom of Shock
3. Remove shock with top mount
4. Remove Top mount from the (heald on by a nut i think?)
5. Remove dust cover from old shock and transfer to new shock
6. Fix new topmount to new shock and do up nut
7. put bolts all back in
Am I missing any tools i might need? I dont have an impact gun but am getting a new tool kit this week with 3/8, 1/2 ratchet spanners and up to 23mm sockets.
* Ratchet sockets up to 23mm
* Spanners up to 17mm and long reach sockets up to the same
* Low entry jack(need to get axle stands)
* Patience