Hi ,
Having a problem with my Samco Intake Hose,It seems that my car (very early 99) has a different stock intake pipe to most of the s3's and therefore the connections off the stock hose are different or positioned diffently.Firstly having looked at Jon murgies(2000 s10hp s3) gallery his stock pipe is clearly different to mine and identical to the samco one.
http://www.tyresmoke.net/gallery/albun56?&page=3
My stock pipe part no;
06A 133356 E / PXO 416482
Jon's
06A 145892 AJ / PXO 103908
My stock pipe looks identical to this us spec tt225(note pressure sensor on left)
jons and everybody elses looks like this(note pressure sensor on right)
So i've done this basic drawing,
could everybody confirm that i am correct in assuming what goes in each of the samco hose connections,i will try and diy it in if the pressure sensor wire is long enough.thanks for all the help,regards Ryan
Having a problem with my Samco Intake Hose,It seems that my car (very early 99) has a different stock intake pipe to most of the s3's and therefore the connections off the stock hose are different or positioned diffently.Firstly having looked at Jon murgies(2000 s10hp s3) gallery his stock pipe is clearly different to mine and identical to the samco one.
http://www.tyresmoke.net/gallery/albun56?&page=3
My stock pipe part no;
06A 133356 E / PXO 416482
Jon's
06A 145892 AJ / PXO 103908
My stock pipe looks identical to this us spec tt225(note pressure sensor on left)
jons and everybody elses looks like this(note pressure sensor on right)
So i've done this basic drawing,
could everybody confirm that i am correct in assuming what goes in each of the samco hose connections,i will try and diy it in if the pressure sensor wire is long enough.thanks for all the help,regards Ryan