Wd40 sir......Fitted my short number plates, struggling to get the sticky **** off the tail gate though....any ideas??
Sent from my iPhone using Tapatalk
Just relizaed i put that in the wrong section was reading the what do you hate thread lolthat's a bummer martin , i'd claim an extra day for the messup...
which pic/ view are you referring to chap.
And them fitted
And them fitted
I had noticed that with the alignment of the bonnet but wasn't sure if it is off because it mates perfectly at the top of the lights and the wing. Is it out of shape do you's think?
I had noticed that with the alignment of the bonnet but wasn't sure if it is off because it mates perfectly at the top of the lights and the wing. Is it out of shape do you's think?
Not sure @sean. It is the same with mine as well. It mates perfectly at the top of the light and the wing but there is a small gap between both the sides if you look at it from the front. My other B7 had the same problem now that I look at the pictures.
And ever since @Rob mentioned it, it is bugging me . I will have to have it looked but wanted to make sure it is just mine before I do that. It might just be the bumper slightly out - not sure tbh.
Sent from my iPhone using Tapatalk
I bet those oz's are an ET42 or 45 sean, if not very close , if you are still running with the 10 & 20 mm spacers fitted that's where you problem will most likely be, you'll need to be doing some adjustments there very possibly, but if your going big cals then you may want to sort them out first as your spacing may well change again to clear the calipers.
these are the offending adjusters, same part for R & L , sometimes they are just stuck sometimes already broken from previous tampering etc and if your really lucky they will wind up and down without problem...
View attachment 136231