Hey All build thread of my S3
OWNER
Lance
YEAR/MAKE/MODEL
MY2001 Audi S3 ( Quattro )
ENGINE HARDWARE
Fresh rebuilt engine by Seb at Euro Automotive with:
Bottom End balanced and blueprinted
JE 83mm forged pistons
Standard S3 crank
Standard S3 rods, closed and honed with ARP rod bolts
New oil pump
New bearings throughout
All hoses and belts throughout the engine bay are brand new
Engine is currently 5000kms old
ENGINE ACCESSORIES
APR Stage 1+ Chip (1.4bar tune)
APR R1 Diverter vlave
Upgraded coils
DRIVETRAIN HARDWARE
Audi 6 Speed Manual
Haldex Performance 4WD Controller
Unknown upgraded clutch and new dual mass flywheel
Rebuilt gearbox when the Engine was done
ROLLING STOCK
Standard
BODYWORK
Standard Audi Dolhpin Grey
INTERIOR
Standard Recaro Black Leather Interior, with Silver Alacantra
Factory Leather Steering Wheel
Factory Leather Gear Knob
Electric Everything
New South Performance Boost guage, mounted in the drivers side air vent.
STEREO COMPONENTS
Factory Bose Stereo System Includes: Front Splits, Rear Speakers, Twin Subwoofers, Amplifier & 6 Stack CD Player
Plans for Immediate Future:
Adding AUX input to the factory BOSE head unit, ordered, will be installed this weekend
TIP Pipe. ordered, will be installed this weekend
Pod filter with some sort of heat shield possible.
Move the boost guage to ontop of the steering column. Already have the mount, and I want my air vent! Possibly also a new boost guage in this process as the currently guage doesnt remeber the selected colour.
H&R springs
Blacked out badges front and rear (already have the 4 rings, need to try and source S3's badges and Quatto is possible), with blacked out front grille. Will be installed this weekend.
Long term plan:
18/19inch Wheels with better tires. This could possible happen sooner rather than later.
Turbo back exhaust
Stage 2+ tune (HPFP if I need it)
Whiteline Sway bars front and rear.
Possibly a FMIC, but i want to keep the fog lights and standard look, and not spend heaps on a Forge kit
Wanting around 200AWKW
Photos
OWNER
Lance
YEAR/MAKE/MODEL
MY2001 Audi S3 ( Quattro )
ENGINE HARDWARE
Fresh rebuilt engine by Seb at Euro Automotive with:
Bottom End balanced and blueprinted
JE 83mm forged pistons
Standard S3 crank
Standard S3 rods, closed and honed with ARP rod bolts
New oil pump
New bearings throughout
All hoses and belts throughout the engine bay are brand new
Engine is currently 5000kms old
ENGINE ACCESSORIES
APR Stage 1+ Chip (1.4bar tune)
APR R1 Diverter vlave
Upgraded coils
DRIVETRAIN HARDWARE
Audi 6 Speed Manual
Haldex Performance 4WD Controller
Unknown upgraded clutch and new dual mass flywheel
Rebuilt gearbox when the Engine was done
ROLLING STOCK
Standard
BODYWORK
Standard Audi Dolhpin Grey
INTERIOR
Standard Recaro Black Leather Interior, with Silver Alacantra
Factory Leather Steering Wheel
Factory Leather Gear Knob
Electric Everything
New South Performance Boost guage, mounted in the drivers side air vent.
STEREO COMPONENTS
Factory Bose Stereo System Includes: Front Splits, Rear Speakers, Twin Subwoofers, Amplifier & 6 Stack CD Player
Plans for Immediate Future:
Adding AUX input to the factory BOSE head unit, ordered, will be installed this weekend
TIP Pipe. ordered, will be installed this weekend
Pod filter with some sort of heat shield possible.
Move the boost guage to ontop of the steering column. Already have the mount, and I want my air vent! Possibly also a new boost guage in this process as the currently guage doesnt remeber the selected colour.
H&R springs
Blacked out badges front and rear (already have the 4 rings, need to try and source S3's badges and Quatto is possible), with blacked out front grille. Will be installed this weekend.
Long term plan:
18/19inch Wheels with better tires. This could possible happen sooner rather than later.
Turbo back exhaust
Stage 2+ tune (HPFP if I need it)
Whiteline Sway bars front and rear.
Possibly a FMIC, but i want to keep the fog lights and standard look, and not spend heaps on a Forge kit
Wanting around 200AWKW
Photos