agu

Okay i have an interesting case here. I have S3 8L which motor has been swapped from AMK to AGU because AMK blew up. I'm pretty sure its runnin on S3 ECU, also have S3 intercoolers and maybe a fuel pump. The question is how I can make more power so that the AGU is on par with the stock AMK...

Motronic injection and ignition system AGU

Engine_Mechanics AGU AJQ APP AQA ARX ARY ARZ AUM AUQ

Please could someone help me diagnose a miss fire, having read the other threads on possible misfires mine isnt the same symptoms. Driving normally not above 3,000 revs and not accelerating very hard by that i mean foot to the floor max boosting, car drives and feels perfectly normal. If i...

Hi guys, this is my first post. Iv recently purchased an S3 8l, i made sure it was a BAM engine code as i believe these are the more desirable engine. Was looking in the engine bay at the weekend and discovered an 'AGU' stamp on the head. I was at first dissapointed thinking id bought a car...

Hi guys, I'm happy to say I've just became an owner of my first turbo car (1998 Mk4 GTI), it has an AGU engine thats why I'm posting on an Audi forum (same engine as the A3). I've done some research all over forums for what to do to get more power. I'm aiming for over 200 ill be happy with 215...

Hello all I recently aquired a AGU a3 with a 6spd 02m from a lcr. My above mentioned problem is that the inner boot on gearbox side gets ripped after a few weeks, i'm about to change it for the third time now, and from what i know, the gearbox is slighty wider, thus the shorter driveshafts...

Ok, so I have an AGU swapped MK2 Golf and I've been facing a lot of trouble with my swap, namely deleting the SAI, Charcoal Canister & PCV, so I was advised by Tuffty to post here. My AGU is fully built with forged rods & pistons, K03S (going K300 in the future) so changing the powerplant is...

hello, I have a -98 a3 8L 1.8t agu and want to get some power out of it on e85 (its MUTCH cheaper in finland than normal gas) and I did the maf mod but im maxing out the injectors already and would want to put a plug and play stand-alone in it, was wondering which one is better, the emerald k6...

I am looking to perform a wideband conversion on my AGU A3. I could have the immob defeated on the ECU and be done with it, but I was wondering if it was possible to fit a facelift cluster instead... Anyone done this before?

Problem: The plastic connector which clips into the reverse light switch (on the gearbox, 02J version) has warped out of shape and doesn't sit inside the reverse light switch anymore. I've tried searching online for a replacement connector but it's a nightmare. Plenty of offers for replacement...

morning all I'd like to start by saying hello. I am a long time lurker and have finally joined up. I have a conundrum and am receiving various conflicting information regarding mapping my car. I bought a 1998 fsh 85k 1.8t a3 as a hobby car with a view to learn whilst restoring and maintaining...

Hi all, Just bought my first Audi which is a 2000 a3 1.8t AGU 150bhp a few weeks ago and was wondering what you guys recommend for a bit more bhp. Car came with a front mounted intercooler (which sticks out through the bumper) also a K&N cold feed (non filter version, direct from intercooler)...

Hello everyone I started a thread a couple of weeks ago due to car not starting I think iv narrowed it down to the ecu getting water damaged. The car is a audi a3 8l 1.8t Engine code- AGU Ecu code - 06A906018cj Took ecu out and opened it up. Was wet inside a lot of moisture and the circuit...