Hello,
Looking for any other idea as I am out of any possibilities.
2004 A3 8P 2 door.
8p0 959 801 J Driver door controller
8p0 959 802 G Passenger door controller
2 different to enable mirror folding with remote. All worked fine until 2 weeks ago when I wanted to mount a new steering wheel.
Disconnected - of the battery as per Audi Manual , did my check with airbag. Put everything back and connected battery. After this the window does not roll up with the driver door button.
Already done:
1. Learn ends , hold up and down , confirmed with VCDS ENDS Learned.
2. Button sends command for auto open , I can see that in VCDS
3. Changed Button same thing , changed Controller completely same thing.
4. Left controller disconnected 12 h same thing ...
Passenger window works form driver door button.
Driver window goes up completely via auto close from remote , I still have the separate comfort module pre 2010 that has auto close.
Mirrors fold with remote just fine and open with ignition so the controller is connected etc.
No errors ...
I am out of ideas , grateful for any new idea to try ...
Looking for any other idea as I am out of any possibilities.
2004 A3 8P 2 door.
8p0 959 801 J Driver door controller
8p0 959 802 G Passenger door controller
2 different to enable mirror folding with remote. All worked fine until 2 weeks ago when I wanted to mount a new steering wheel.
Disconnected - of the battery as per Audi Manual , did my check with airbag. Put everything back and connected battery. After this the window does not roll up with the driver door button.
Already done:
1. Learn ends , hold up and down , confirmed with VCDS ENDS Learned.
2. Button sends command for auto open , I can see that in VCDS
3. Changed Button same thing , changed Controller completely same thing.
4. Left controller disconnected 12 h same thing ...
Passenger window works form driver door button.
Driver window goes up completely via auto close from remote , I still have the separate comfort module pre 2010 that has auto close.
Mirrors fold with remote just fine and open with ignition so the controller is connected etc.
No errors ...
I am out of ideas , grateful for any new idea to try ...