Griunvaldas
Registered User
- Joined
- Oct 4, 2016
- Messages
- 13
- Reaction score
- 1
- Points
- 1
Very easy..Installing my cruise stalk and the DIS stalk tomorrow, can anyone clarify what it is exactly I do to get rid of the window washer fluid error ? And where exactly it's found
Many thanks
You can get a sensor and the plug from ebay remove the passenger side wheel and wheel arch liner and you do need to remove the windscreen washer fluid reservoir and remove the grommet and put the sensor and run the wires behind the stereo and gloves box ti the sensor..
Connect the wire to one side of the plug and the other attach it to a screw to ground it and put everything back together and it'll warn you when your washer fluid is low.
Sent from my SM-G935F using Tapatalk
Look at this on eBay http://www.ebay.co.uk/itm/112271046234100% chap thanks, I'll have a look on ebay for them now
Look at this on eBay http://www.ebay.co.uk/itm/112271046234
Here you go..
With sensor with plug..
Very cheap..
Sent from my SM-G935F using Tapatalk
Shouldn't have been like that..
I done it first time on my own and didn't have any problems with it..
Sent from my SM-G935F using Tapatalk
From memory mate there is a bolt undernaeth the lower cowling, one single one in the middle, i had the same problem. when you undo this it lets it move back and is easy to get the new on one. Sorry i dont have picsGuys i've got the lower cowling off and looking to fit the stalk now, cant see how I get it on. Can someone give me some detail on how to fit it exactly? Do I need to lower the existing stalk a bit? Pictures on the first page seem to have stopped working...
If it coded for cruise it'll code for trip computer..
Probably made a wrong turn somewhere along the way.
Recheck everything and if necessary clear everything and start the coding from the beginning.
Sent from my SM-G935F using Tapatalk