Welcome
To be honest I would not compare previous cars / models to what we have as there seems to be a lot of differences in the way that options and features are implemented, for example the Green Engineering menu in which A4, A5, A6 cars etc could activate Drive select and maybe VIM... but on our cars Standard MMI = can do next to nothing, TechPack = can do even less believe it or not lol
Long Coding Bytes and Bits are the ones which need mapping / labelling as Adaptations are always present, just maybe in german. So there is no chance of any more adaptations popping up in newer versions of VCDS unless they are added within a firmware update of the module or a newer version of the module hardware.
It may well be that Auto Hold is activated via Adaptations but tweaked within Long Coding, and the needed Bit for "function state" is unlabelled... in fact, even with beta 16.3.1, all of 03 - ABS is currently unlabelled
Edit: should have said... unlabelled at least for my current hardware and firmware version of 03 - ABS.
Makes perfect sense. So then my next question would be -- how do I get deeper into it and look for the adaptation (I can try to translate the German!) that seems to be missing?
I looked at admaps of other models that seem to have the same ABS module, and this is how similar it is:
Other vehicle:
Code:
;SW:5Q0-907-379-AC HW:5Q0-907-379-D --- ABS Brakes
;Component:ESC H75 0437 Coding:01FA8AA1202312700377060701C32980510448C0608094F3002A0028C1
;EV_Brake1UDSContiMK100IPB 8020 EV_Brake1UDSContiMK100IPB_AU37.rod
;Saturday 2 August 2014
;VCDS Version: Release 12.12.0 Data version: 20130910
;VCID: 7DF1154CECFCAFF6FF5-8028
;With access code for module controller
ABS in lower speed range activated
Activating and deactivating all development messages 0
AUTO HOLD functional status Last setting
AUTO HOLD functionality not activated
AUTO HOLD increase threshold; full tensioning force 10%
AUTO HOLD increase threshold; reduced tensioning force 0%
AUTO HOLD slippage recognition activated
My vehicle:
Code:
;SW:3Q0-907-379-AA HW:3Q0-907-379-F --- ABS Brakes
;Component:ESC H42 0623 Coding:13FF6A9234210A73017F030681CB29C8562C5080C08194B6024100548208
;EV_Brake1UDSContiMK100IPB 34036 EV_Brake1UDSContiMK100IPB_AU37.rod
;Wednesday 28 October 2015 15:34:54:59061
;VCDS Version: Release 15.7.1 (x64) Data version: 20150904
;VCID: 79D71FE2F83FE7F61A-802C
Activating and deactivating all development messages not active
AUTO HOLD functionality not activated [OK, this line now says activated, posting an older admap here, but otherwise identical]
AUTO HOLD increase threshold; full tensioning force 10%
AUTO HOLD increase threshold; reduced tensioning force 0%
AUTO HOLD slippage recognition activated
As you can see, nearly identical, just need "AUTO HOLD functional status" in mine...