Will they fit?

[Buzzer]

Advertised in a local site, mg rover 75 alloys
With 5x 100, good so far , but offset 50 and bore 55
Will I have to buy spigots or spacers etc
Thanks guys

 

[Speedy Steve]

not sure on the bore size but youd need huge spacers

 

[Buzzer]

How big do the spacers have to be ?

 

[steve bain]

30mm of so. bore is too small, you need 57.1 so they would need machining out

 

[Alex C]

could just make a spacer that will fit the 57.1 hub on the inside and your wheel bore on the outside...if your gonna play around with machining stuff anyway. Basically a very fat spigot ring

 

[audi-tk]

probably a 15mm spacer mate and rings as mentioned above

 

[Buzzer]

thanks for the replies lads, decided to keep the originals and get them powder coated. thanks again