Hi Folks,
I finally picked up an Audi A4 B8 (1.8tfsi) and the seller replaced the battery for me and replaced it with He bought a new Yuasa HSB110 Silver (800amps and 85aH). I must admit the seller has been very very helpful and has assured me that he will fix any issues with the car. This has now also resolved the speedo issue and it no longer dims certain areas on the instrument cluster. I have been running the car since and can't see any issues with the instrument cluster anymore. I also tried coding the battery but Yuasa doesn't seem to have a BEM code and I am not sure how to code it - any helps?
Also, I ran the scan again last night and it showed me few error messages. The one below was there before the battery was replaced. I have now cleared it. I will scan tonight and see if it comes up again.
Address 19: CAN Gateway (J533) Labels:. 8T0-907-468.clb
Part No SW: 8T0 907 468 R HW: 8T0 907 468 H
Component: GW-BEM 5CAN H06 0105
Revision: GB600050 Serial number: 5000G1012080DF
Coding: 00C303
Shop #: WSC 06325 000 00000
VCID: 50A900F103D272C65A-8004
Subsystem 1 - Part No SW: 8K0 915 181 E HW: 8K0 915 181 E
Component: J367-BDM H07 0170
Serial number: 100024A1140110
1 Fault Found:
03041 - Energy Management Active
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 8
Reset counter: 131
Mileage: 80134 km
Time Indication: 0
Date: 2017.10.06
Time: 09:48:17
Freeze Frame:
Bin. Bits: 10111
Voltage: 11.70 V
Count: 6
This one has now been cleared. I will run the scan again tonight and find out if it comes up again.
However, there are two additional codes which have come up, which were not there before. These have a time-stamp of exactly when the battery was changed as I changed the date/time when I reached home.
Address 01: Engine (------CDHB) Labels:| 06H-907-115-CAB.clb
Part No SW: 8K1 907 115 M HW: 8K1 907 115
Component: 1.8l R4/4V TF H11 0002
Revision: A5H11---
Coding: 0104000C02070120
Shop #: WSC 06325 000 00000
ASAM Dataset: EV_ECM18TFS8K1907115M A01002
ROD: EV_ECM18TFS_AU48.rod
VCID: 387958518362CA8672-806C
1 Fault Found:
7781 - Engine Off Timer Performance
P150A 00 [032] - -
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 80412 km
Date: 2009.06.26
Time: 00:15:20
Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 72 °C
Intake air temperature: 57 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 12.038 V
Unlearning counter according OBD: 35
Readiness: 0000 0000
-----------------------------------------------
Address 08: Auto HVAC (J255) Labels:. 8Tx-820-043-3Z.clb
Part No SW: 8T2 820 043 AF HW: 8T2 820 043 AF
Component: KLIMA 3 ZONEN H08 0171
Revision: D0000000 Serial number: 01220120101531
Coding: 64040000
Shop #: WSC 06325 000 00000
VCID: 76E59669C1F67CF6A0-8022
1 Fault Found:
01206 - Signal for Duration of Ignition Off Time
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 138
Mileage: 80412 km
Time Indication: 0
Date: 2009.06.26
Time: 00:04:02
I have cleared 01206 but not 7781 and I was wondering what this is and whether or not I should clear it.
Would appreciate any help. Thanks.
I finally picked up an Audi A4 B8 (1.8tfsi) and the seller replaced the battery for me and replaced it with He bought a new Yuasa HSB110 Silver (800amps and 85aH). I must admit the seller has been very very helpful and has assured me that he will fix any issues with the car. This has now also resolved the speedo issue and it no longer dims certain areas on the instrument cluster. I have been running the car since and can't see any issues with the instrument cluster anymore. I also tried coding the battery but Yuasa doesn't seem to have a BEM code and I am not sure how to code it - any helps?
Also, I ran the scan again last night and it showed me few error messages. The one below was there before the battery was replaced. I have now cleared it. I will scan tonight and see if it comes up again.
Address 19: CAN Gateway (J533) Labels:. 8T0-907-468.clb
Part No SW: 8T0 907 468 R HW: 8T0 907 468 H
Component: GW-BEM 5CAN H06 0105
Revision: GB600050 Serial number: 5000G1012080DF
Coding: 00C303
Shop #: WSC 06325 000 00000
VCID: 50A900F103D272C65A-8004
Subsystem 1 - Part No SW: 8K0 915 181 E HW: 8K0 915 181 E
Component: J367-BDM H07 0170
Serial number: 100024A1140110
1 Fault Found:
03041 - Energy Management Active
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 8
Reset counter: 131
Mileage: 80134 km
Time Indication: 0
Date: 2017.10.06
Time: 09:48:17
Freeze Frame:
Bin. Bits: 10111
Voltage: 11.70 V
Count: 6
This one has now been cleared. I will run the scan again tonight and find out if it comes up again.
However, there are two additional codes which have come up, which were not there before. These have a time-stamp of exactly when the battery was changed as I changed the date/time when I reached home.
Address 01: Engine (------CDHB) Labels:| 06H-907-115-CAB.clb
Part No SW: 8K1 907 115 M HW: 8K1 907 115
Component: 1.8l R4/4V TF H11 0002
Revision: A5H11---
Coding: 0104000C02070120
Shop #: WSC 06325 000 00000
ASAM Dataset: EV_ECM18TFS8K1907115M A01002
ROD: EV_ECM18TFS_AU48.rod
VCID: 387958518362CA8672-806C
1 Fault Found:
7781 - Engine Off Timer Performance
P150A 00 [032] - -
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 80412 km
Date: 2009.06.26
Time: 00:15:20
Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 72 °C
Intake air temperature: 57 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 12.038 V
Unlearning counter according OBD: 35
Readiness: 0000 0000
-----------------------------------------------
Address 08: Auto HVAC (J255) Labels:. 8Tx-820-043-3Z.clb
Part No SW: 8T2 820 043 AF HW: 8T2 820 043 AF
Component: KLIMA 3 ZONEN H08 0171
Revision: D0000000 Serial number: 01220120101531
Coding: 64040000
Shop #: WSC 06325 000 00000
VCID: 76E59669C1F67CF6A0-8022
1 Fault Found:
01206 - Signal for Duration of Ignition Off Time
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 138
Mileage: 80412 km
Time Indication: 0
Date: 2009.06.26
Time: 00:04:02
I have cleared 01206 but not 7781 and I was wondering what this is and whether or not I should clear it.
Would appreciate any help. Thanks.