Hi, the other day i noticed when i started my car (2004 2.0 tdi) the engine jumped to 1600 revs before settling at normal tickover 8-900. Like i had started it with part throttle.
Next both the fans on the radiator were running at full speed even tho the temp guage was still at 50 degrees C.
I got a friends code reader on it and the 2 main codes thrown were:
19463 camshaft position sensor (G40): No signal
P3007 - 000 - - - Intermittant
and
16502 - Engine coolant temp sensor (G62): Signal too high
P0118 - 000 - -
Having done a search of this forum i had a read and decided to change the coolant temp sensor. I replaced the temp sensor twice (just incase i picked up a faulty one) and still as soon as the i put the ignition on the fans run at full speed.
Anyone got any advice or tips before i take it to audi as ive just moved house and really cant afford audi prices at the moment, thanks.
Next both the fans on the radiator were running at full speed even tho the temp guage was still at 50 degrees C.
I got a friends code reader on it and the 2 main codes thrown were:
19463 camshaft position sensor (G40): No signal
P3007 - 000 - - - Intermittant
and
16502 - Engine coolant temp sensor (G62): Signal too high
P0118 - 000 - -
Having done a search of this forum i had a read and decided to change the coolant temp sensor. I replaced the temp sensor twice (just incase i picked up a faulty one) and still as soon as the i put the ignition on the fans run at full speed.
Anyone got any advice or tips before i take it to audi as ive just moved house and really cant afford audi prices at the moment, thanks.