Removing key blade from fob

drewbee · Mar 27, 2010

I'm tryin to get my key cut from a eBay seller but can't take the blade out of the case. Does anyone know?

Turkster · Mar 27, 2010

there should be a pin you push out of the blade when flipped out,

stokeballoon · Mar 27, 2010

Don 't flip the blade fully out. Let it come 1/2 way out, and you will see a very small roll pin, you need to get a very small pin to drive it out, don't drive it all the way out, just enough to allow the blade to be removed.

drewbee · Mar 27, 2010

stokeballoon said:
Don 't flip the blade fully out. Let it come 1/2 way out, and you will see a very small roll pin, you need to get a very small pin to drive it out, don't drive it all the way out, just enough to allow the blade to be removed.

thanks for that, would never have known. now i gota find a pin that will push it out LOL

griswold · Mar 27, 2010

I used a small panel pin and tapped out with a hammer gently, place the key blade on the edge of something sturdy and flat so you dont stress the key flip part

Removing key blade from fob

drewbee

Registered User

Turkster

W.Bro.Paul 2.0d Q5 Quattro

stokeballoon

Registered User

drewbee

Registered User

griswold

Registered User

Similar threads