Try 000-979-009-E wire set, AA 017 H49 housing and 4B0-971-832 and then connect to the ESP![/QUOTE]
For what it's worth, I'll post a follow up. The illumination was a fifteen minute modification.
1)Remove the left sided manifold
2) Remove the white ESP housing
3) Remove the black wire assembly inside the white ESP housing
the black wire assembly is labeled with 4 slots 1,3,4,6. 1 is for illumination, 6 is for power, 3 is ground and 4 i don't know
4) attach 3M IDC connector (for 18-22 AWG wires) to ESP wire from the number 1 slot to the splice wire.
5) attach another 3M IDC connector to ESP wire from the number 3 position to the other splice wire.
6) Take splice wires and move them inside and around the Emerg switch(yeah its kinda obvious)
7) Connect splice wire 1 into the 1 slot on the card holder housing labeled 1
8) Connect splice wire 3 into the slot on the card holder assembly labeled 2
9) Replace everything! Your Done!
Don't know if any help but I always try to lend a helpful hand!