Hello guys.
I'm new to A1's as I previously had A3's and A4's.
I took a gamble on a 2011 1.4 TFSI with a stretched chain which I have rectified with some engine surgery.
After running a scan on VCDS (gen cable) I was left with a few codes.
Wednesday,26,April,2023,17:58:41:31934
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64
VCDS Version: 23.3.0.0 (x64)
Data version: 20230228 DS346.1
www.Ross-Tech.com
VIN: WAUZZZ8X9BB095228 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8X0-953-569.clb
Control Module Part Number: 8X0 953 501 B HW: 5K0 953 569 H
Component and/or Version: LENKS.MODUL 014 0140
Software Coding: 1184004000
Work Shop Code: WSC 00046 790 00000
ASAM Dataset: EV_VW360SteerWheelUDS A03004 (AU21)
ROD: EV_VW360SteerWheelUDS.rod
VCID: 39795BF5B8252C5BC4-806C
1 Fault Found:
365080 - Controls in Steering Wheel
U108E 00 [009] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Date: 2023.04.26
Time: 17:56:32
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 16: DTCs cleared
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 17: Instruments Labels: 8X0-920-xxx-17.clb-SRI1
Control Module Part Number: 8X0 920 980 HW: 8X0 920 980
Component and/or Version: KOMBI H07 0124
Software Coding: 41DE00
Work Shop Code: WSC 00046 790 00000
ASAM Dataset: EV_Kombi_UDS_VDD_AU10 A04086 (AU21)
ROD: EV_Kombi_UDS_VDD_AU10.rod
VCID: 7CF782E1F797D9739F-8028
1 Fault Found:
13639168 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Date: 2023.04.26
Time: 17:56:34
Address 17: DTCs cleared
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 8X0-907-468.clb
Control Module Part Number: 8X0 907 468 A HW: 8X0 907 468 A
Component and/or Version: GAT 4CAN 1L M H04 0083
Software Coding: FBCF0064000100010153
Work Shop Code: WSC 00046 000 00000
VCID: 4385391DC2E9668B9E-8016
2 Faults Found:
01771 - Control Module for Headlight Range (J431)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Time Indication: 0
Date: 2023.04.26
Time: 17:56:34
Freeze Frame:
Bin. Bits: 11111
Voltage: 14.70 V
Count: 6
Bin. Bits: 10011
Time: 25.40 s
02076 - Media Player Position 1 (R118)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Time Indication: 0
Date: 2023.04.26
Time: 17:57:33
Freeze Frame:
Bin. Bits: 11111
Voltage: 14.70 V
Count: 6
Bin. Bits: 10011
I have done a bit of digging and it appears the steering fault is likely to be the clock spring unit but, I am wondering if any of these other issues are related to it. The headlamps were upgraded to LED units at some point so I don't know if the Headlamp range issue is connected?
Final question is, does the 6 speed manual gearbox give much trouble? Sat at idle it sounds like something scraping until I dip the clutch and it completely disappears. The car drives and gearchanges perfectly but the noise is horrible until the clutch is pressed.
Any help is greatly appreciated.
Cheers.
I'm new to A1's as I previously had A3's and A4's.
I took a gamble on a 2011 1.4 TFSI with a stretched chain which I have rectified with some engine surgery.
After running a scan on VCDS (gen cable) I was left with a few codes.
Wednesday,26,April,2023,17:58:41:31934
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64
VCDS Version: 23.3.0.0 (x64)
Data version: 20230228 DS346.1
www.Ross-Tech.com
VIN: WAUZZZ8X9BB095228 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8X0-953-569.clb
Control Module Part Number: 8X0 953 501 B HW: 5K0 953 569 H
Component and/or Version: LENKS.MODUL 014 0140
Software Coding: 1184004000
Work Shop Code: WSC 00046 790 00000
ASAM Dataset: EV_VW360SteerWheelUDS A03004 (AU21)
ROD: EV_VW360SteerWheelUDS.rod
VCID: 39795BF5B8252C5BC4-806C
1 Fault Found:
365080 - Controls in Steering Wheel
U108E 00 [009] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Date: 2023.04.26
Time: 17:56:32
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 16: DTCs cleared
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 17: Instruments Labels: 8X0-920-xxx-17.clb-SRI1
Control Module Part Number: 8X0 920 980 HW: 8X0 920 980
Component and/or Version: KOMBI H07 0124
Software Coding: 41DE00
Work Shop Code: WSC 00046 790 00000
ASAM Dataset: EV_Kombi_UDS_VDD_AU10 A04086 (AU21)
ROD: EV_Kombi_UDS_VDD_AU10.rod
VCID: 7CF782E1F797D9739F-8028
1 Fault Found:
13639168 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Date: 2023.04.26
Time: 17:56:34
Address 17: DTCs cleared
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 8X0-907-468.clb
Control Module Part Number: 8X0 907 468 A HW: 8X0 907 468 A
Component and/or Version: GAT 4CAN 1L M H04 0083
Software Coding: FBCF0064000100010153
Work Shop Code: WSC 00046 000 00000
VCID: 4385391DC2E9668B9E-8016
2 Faults Found:
01771 - Control Module for Headlight Range (J431)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Time Indication: 0
Date: 2023.04.26
Time: 17:56:34
Freeze Frame:
Bin. Bits: 11111
Voltage: 14.70 V
Count: 6
Bin. Bits: 10011
Time: 25.40 s
02076 - Media Player Position 1 (R118)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 193
Mileage: 210310 km
Time Indication: 0
Date: 2023.04.26
Time: 17:57:33
Freeze Frame:
Bin. Bits: 11111
Voltage: 14.70 V
Count: 6
Bin. Bits: 10011
I have done a bit of digging and it appears the steering fault is likely to be the clock spring unit but, I am wondering if any of these other issues are related to it. The headlamps were upgraded to LED units at some point so I don't know if the Headlamp range issue is connected?
Final question is, does the 6 speed manual gearbox give much trouble? Sat at idle it sounds like something scraping until I dip the clutch and it completely disappears. The car drives and gearchanges perfectly but the noise is horrible until the clutch is pressed.
Any help is greatly appreciated.
Cheers.
