Retrofitting heated seats in my car using the Kufatec seat wiring looms however having followed all the instructions including coding it, I have the following error message:
133899 - Voltage Supply; Terminal 30 for Seat Heaters
B1411 13 [009]
- Open Circuit
It is wired as per the Kufatec instructions but they don’t appear to be correct for UK cars.
Plug A pin 2&5.
Plug A pin 1 to fuse carrier. (SC26).
Plug C pin 40, 43, 56.
Coding doubled checked, fuse fine and heated seat buttons go on and off ok but no heat in seats.
Can anyone confirm the correct wiring
Thanks.
133899 - Voltage Supply; Terminal 30 for Seat Heaters
B1411 13 [009]
- Open Circuit
It is wired as per the Kufatec instructions but they don’t appear to be correct for UK cars.
Plug A pin 2&5.
Plug A pin 1 to fuse carrier. (SC26).
Plug C pin 40, 43, 56.
Coding doubled checked, fuse fine and heated seat buttons go on and off ok but no heat in seats.
Can anyone confirm the correct wiring
Thanks.