Hi All,
I'm attempting to code the rear parking sensors on my A3 8P. The module I installed is: 8P0 919 475 G and coding is default to 00003. I've logged in with the security code and setup the User Interface and Identification with values other than 0. However, I'm getting the message Error 31: Request out of range - Coding Rejected when I attempt to set the car to RHD and a3 S-line.
The car is on jack stands, if I put it into reverse you can hear them beep. However, I cant confirm if there are any other adverse effects when I drive the car (I've read someone who would get a constant beep when the car was above 15mph)
I'm attempting to code the rear parking sensors on my A3 8P. The module I installed is: 8P0 919 475 G and coding is default to 00003. I've logged in with the security code and setup the User Interface and Identification with values other than 0. However, I'm getting the message Error 31: Request out of range - Coding Rejected when I attempt to set the car to RHD and a3 S-line.
The car is on jack stands, if I put it into reverse you can hear them beep. However, I cant confirm if there are any other adverse effects when I drive the car (I've read someone who would get a constant beep when the car was above 15mph)