Anyone near Milton Keynes with VCDS that could help me change the auto stop/start function as i keep forgetting to manually press the button when i get in the car, then the car cuts out as im pulling up to junctions and roundabouts!
Saw the following post which leads me to believe I need the second option "enable start/stop memory" so if the button is pressed to deactivate auto stop/start it will stay like that even once the car is switched off.
Module 09 > SA: 20113 > Adaptions > Read channel 34 >
You then have these options:
- subtract 4 from the value = stop/start off by default
- add 32 to the value = enable stop/start memory
- add 64 to the value = invert the light in the stop/start switch (light on when stop/start on rather than when off)
Saw the following post which leads me to believe I need the second option "enable start/stop memory" so if the button is pressed to deactivate auto stop/start it will stay like that even once the car is switched off.
Module 09 > SA: 20113 > Adaptions > Read channel 34 >
You then have these options:
- subtract 4 from the value = stop/start off by default
- add 32 to the value = enable stop/start memory
- add 64 to the value = invert the light in the stop/start switch (light on when stop/start on rather than when off)