S3 8L unknown connector behind glove box

[S3Powerxz]

Hello. As the title says i removed the glove box and i find unattached connector. What is it for? I didn't saw a place where i can connect it on glove box or anywhere else.
I removed it cause of this error:
00604 - Potentiometer Positioning Motor for Air Flow Flap (G113)
30-10 - Open or Short to Plus - Intermittent

Anyone know how to fix it?

 

[SamHendry]

Possibly the glove box light connecter?

 

[S3Powerxz]

No. The light connector is on the right side of the glove box. And before i remove it the light was working fine. This connetor was sitting there unattached.

 

[Tj 0785]

Airbag?

 

[S3Powerxz]

Well i look around the airbag and all seems connected. Also, wouldn't it throw fault in vcds if there is unplugged connector from airbag module?

 

[vag-tech]

It's not airbag. Airbag is yellow. And yes it definitely would log a fault.
You removed the glovebox because of error:
00604 - Potentiometer Positioning Motor for Air Flow Flap (G113)
30-10 - Open or Short to Plus - Intermittent??

So does this code clear?

 

[S3Powerxz]

Yes. I removed it because of this error.
And it comes back 10-15 min. after i clear it.
The main reason to start digging is cause i have very annoying squealing from somewhere inside the dash after accelerating above 70 km/h and it stops when i slow down to around 50km/h. Doesn't matter heater/AC turned on or off. It's always squearing.