S3 (8P) daily and track day car

Ive always fitted uprated droplinks out of habit and the whiteline ones were cheap compared to what I've bought for previous cars/projects so why not
 
Vagbremtechnic brakes turned up at the weekend (4 pot TTRS brembos from Aston Martin) and 340mm discs and DS2500 ferodo pads






While I dropped off the brakes at the garage got a few pics of the suspension fitted so far









Looking forwards to picking up the S3 with all the suspension bits on and the uprated brakes, all in time for a track session at the end of the month
 
Reactions: HHS3, S. and leshkin
Some very nice additions there - love it! You might find that setting the rear ARB to the harder setting, rather than the current soft, should improve the way the car turns-in in tight corners.
 
Last edited:
Reactions: psmurphy
Spec list as it stands

Engine\fuelling\map
Revo stage 2+ map (approx 360bhp)
Revo intake (heat wrapped)
Uprated fuel pump
Turboback 3" milltek exhaust with sport cat and black tips
Milltek 3" downpipe
New turbo gaskets and nuts

Wheels\tyres
Yokohama advan Neova AD08R tyres
15mm spacers all round

Suspension
Bilstein PSS10 B16 coilovers
Front H&R anti-roll bar
Rear H&R anti-roll bar
Front whiteline adjustable anti-roll bar drop links
Rear whiteline adjustable anti-roll bar drop links
Powerflex anti lift kit
Superpro front camber adjustable ball joints
Front wishbone bushes

Brakes
Front : Vagbremtechnic 4 pot Brembo Aston Martin (TTRS) calipers, 340mm Vagbremtechnic discs, braided lines
Rear : Vagbremtechnic rear discs, braided lines

Transmission
Stage 2 organic clutch and dual mass flywheel

Pretty much ready for its first track session at Oulton Park at the end of the month - booked it in for alignment setup next week prior to the track session

That's it for a while now. Future plans are for a TTE480 turbo conversion with supporting mods and custom remap with Unicorn Motor Developments
 
Reactions: S3Alex
Sounding good buddy, those brakes are looking nice.

Enjoy your first track session in it too, let us know how you get on.
 
Reactions: psmurphy
S3 has now had a full geometry setup at a place I've used in the past that also setup race cars

Height adjusted via the coilovers so its not too low, the ARBs are set to hard at the rear and soft at the front and the dampers are set to 8 at the rear and 4 at the front with 1 being soft and 10 hard

All ready for the track session tomorrow

Pic on the ramp being setup



Pics of where the damper adjustments are on the Bilstein B16 PSS10 coilovers - bit awkward to get to

Front



Rear

 
Reactions: S3Alex and HHS3
some profile pics of the wheels with 15mm spacers fitted front n rear as lots of people ask about spacers on here



 
Reactions: leshkin
the s3 was on track at oulton park today was faultless and very happy with how she drove and handled cant wait for the next time on track
 
Reactions: HHS3
Do 235's fit on this car without rubbing issues? I track once or twice a year and Drag Race every month. I have 19x8 45 mm wheels with 225/35 r19, wanna install 235/35 r19.
 

Similar threads

Replies
9
Views
2K
Replies
6
Views
2K
Replies
15
Views
2K
Replies
0
Views
775
Cookies are required to use this site. You must accept them to continue using the site. Learn more…