Number Plate Light Screws

[RSW46]

Hi All, does anyone know where I can get replacements for the screws which hold the number plate light housings in? I've managed to really chew mine up taking them out and can't find anything similar in the garage! I did buy some on eBay but they turned out to be the wrong pitch. If anyone can help I'd appreciate it as currently have no number plate lights! Cheers.

 

[Orange225]

If you can find some, screws with a torx head are a lot easier to fit/remove without damaging them

 

[LEE69]

http://www.audi-sport.net/xf/thread...-for-number-plate-lights.256424/#post-2599812

 

[SootySport]

I found a brass screw in my odd nuts/bolts/screws bin that fits a treat. Must be something laying around your Gaff that fits.

 

[Craig-P]

@LEE69 - Good man

 

[RSW46]

Thanks for all the answers, although the one in the link is a 0.5mm pitch whereas mine is a 1mm pitch so not sure if that would fit. I've just taken apart an old broken PlayStation and I think a couple of the screws from in there will fit! Hopefully they will

 

[RSW46]

Success, the PlayStation screws worked! M3 x 10mm, 1mm pitch. Cheers again