Single wire fault

Hi Everyone

I'm still having a problem with a 001 single wire fault. Does anybody possibly have any ideas where to look, I was thinking it was the drivers door loom that was the problem. Is there a way to actually pin point it using VCDS ?

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 1K0-907-530-V4.clb
Part No SW: 1K0 907 530 S HW: 1K0 907 951
Component: J533__Gateway H16 0210
Revision: H16 Serial number: 3400K09401104A
Coding: ED807F06100202002103
Shop #: WSC 06314 000 00000
VCID: 377A8C50468D2086AC-8062

1 Fault Found:
00470 - Company Comfort Databus in Single Wire
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 3
Fault Frequency: 119
Reset counter: 190
Mileage: 229788 km
Time Indication: 0
Date: 2015.10.28
Time: 13:43:39

Appreciated, as always. Matt.

Thanks @LEE69, While being quite mechanically minded i'm not great with electrics, I can do simple checks i.e condition and visual checks on wiring and connections but am unsure at which modules i should be looking at. can you possibly give me any ideas where to start (explain it to me like i'm a child lol) Thanks Matt.

I never did find, in the end i just thought that if the one i have working fails it would be easier to find when one of the windows stops working etc.