VCDS - a4 tdi help

A4_tdi · Nov 19, 2014

Hi guys,

Could any one tell me how to set up a new inlet flap motor on a4 tdi?

I had the p2015 code so i replaced the lnlet flap motor, car drives spot on but the engine light keeps comming on with same fault code.

Been told something to do with having to set up the new part via vcds/ross tech

Anyone know more on this?

Cheers guys

desertstorm · Nov 19, 2014

http://wiki.ross-tech.com/wiki/index.php/18447/P2015/008213

Think there is an adaption , basic setting for this on VCDS

A4_tdi · Nov 19, 2014

desertstorm said:
http://wiki.ross-tech.com/wiki/index.php/18447/P2015/008213

Think there is an adaption , basic setting for this on VCDS

Hi mate i cant find the adaption setting for it on the screen. Anymore info on this?

Which option do i need to go into etc

Just got the vcds software so its all abit new to me..

Thanks again

SI-W85 · Nov 19, 2014

Not sure if this will help at all but just in case

A4_tdi · Nov 19, 2014

SI-W85 said:
Not sure if this will help at all but just in case

Thanks mate my problem is there isnt a intake flap option on the drop down menu. Theres "test of throttle valve adaption " and " adaptation of regulating flap"

Both of which ive done successfully just cant see one for the actual inlet flat motor...

SI-W85 · Nov 19, 2014

Have a read through this it contains the same question as you are asking didn't read it all so not too sure if it gets resolved or not. http://forums.vwvortex.com/showthre...ced-using-vagcom-for-adaptation-get-error-why

A4_tdi · Nov 20, 2014

Any one on here that has/uses vcds?

VCDS - a4 tdi help

A4_tdi

Registered User

desertstorm

Moderator

A4_tdi

Registered User

SI-W85

Registered User

A4_tdi

Registered User

SI-W85

Registered User

A4_tdi

Registered User

Similar threads