Clutch Switch changed and it is still not working!!!!!
Really driving me crazy!
All the values change when I press the brakes, clutch, turn the cruise on/off, press the buttons and move it up and down. - checked
The value in steering wheel is correct - checked
Went in Engine and the value is 00000? (No saving)
Re-did the coding, control module accepted it:
When I went back though:
This is really driving me nuts!!!
Before this, I also did a scan of the codes and cleared them all.
There was nothing major (I think?)
Address 03: ABS Brakes Labels: 8E0-910-517.clb
Part No SW: 8E0 910 517 H HW: 8E0 614 517 BF
Component: ESP8 FRONT H06 0140
Revision: 00000000 Serial number: 00000000000000
Coding: 0004405
Shop #: WSC 06325 000 00000
VCID: 2C4F137B160BC26293D8325-8078
1 Fault Found:
01826 - Sensor for Steering Angle (G85); Supply Voltage Terminal 30
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 3
Fault Frequency: 3
Reset counter: 39
Time Indication: 0
Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x4222
Hex Value: 0x0024
Hex Value: 0x0196
Hex Value: 0x0001
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 Q
Component: Lenksáulenmodul 0801
Coding: 04041
Shop #: WSC 06325
VCID: 419152CF81893A3A50EE1B9-4B00
1 Fault Found:
01044 - Control Module Incorrectly Coded
35-10 - - - Intermittent
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 8E0-959-433-MAX.lbl
Part No: 8E0 959 433 CQ
Component: Komfortgerát T3B 4336
Coding: 11848
Shop #: WSC 06325
VCID: 02139DC3C40FE1220974CCD-4B1A
Subsystem 1 - Part No: 8E2959802F
Component: Tõrsteuer.FS BRM 0606
Subsystem 2 - Part No: 8E2959801F
Component: Tõrsteuer.BF BRM 0606
Subsystem 3 - Part No: 8E0959801E
Component: Tõrsteuer.HL BRM 0606
Subsystem 4 - Part No: 8E0959802E
Component: Tõrsteuer.HR BRM 0606
2 Faults Found:
01370 - Alarm triggered by Interior Monitoring
35-00 - -
00955 - Key 1
35-10 - - - Intermittent
-------------------------------------------------------------------------------
Cleared them all, took it for a spin and went back in Steering wheel, but there was no error anymore.
The only thing I could think of is:
Followed this guy's guide and changed 46 (Central convenience) to 11852. No errors there I see. Also removed the seatbelt chime using the same guide.
http://www.audizine.com/forum/showthread.php/306018-B6-B7-S4-DIY-VAG-COM-Modification-Walk-Through
The only strange thing to the car I noticed is that when I open the driver's door, it shows as the passenger. Same applies to the passenger door which shows as driver's door. Think it's because I should have added +00218 for RHD
Does anyone have any idea on how to make this CC work?
P.S. Found this other guide that says further changes are needed to ABS, Steering Sensor etc.
https://docs.google.com/file/d/0B6P...WFiNDUtMTg4YzEyZDc1NjEz/edit?ddrp=1&hl=en_GB#