Not if I'm going to get a highline module, do you have an answer to my last post?
I have an answer to your last post so please pay attention !
The following
ONLY applies if you have a 'shield-shaped' (two stage) airbag. If you do not have this 2 stage airbag you
CANNOT retro-fit MFSW. You must also have a highline DIS (split into 3 sections ).
The
ONLY steering module that will work is part number 8P0 953 549
F. It must be 8P0 not 1K0
The correct slip ring for that module is 1K0 959 653 D which includes steering angle sensor.
The software versions in those modules are correct.
If you fit this module then that will be suitable for CC but you will still have to install the control wire which sends the necessary information from the steering module to the engine module, assuming of course it is not already there but on that year of 3 door models they did not usually install it. There are various threads on this forum regarding this control wire and where it goes to and from so do a search.
Unless you have OEM Bluetooth fitted then all the MFSW will do is change the volume and change station/track depending on which source you are using. It will not change the source (i.e from radio to CD)
Both MFSW and CC need coding with VCDS in order for them to work at all.
Please do not come back and ask questions about whether or not other modules will work because they will not on that year and model of A3.