Hi Im looking for someone to install the items pictured which ive bought off ebay. Saved a fortune but have no idea on how to install. I have the latest RNS-E fitted to my 2007 A3.
Ideally if there is someone in the South Wales area or reasonable travelling distance? Any advice/help appreciated.
I could be wrong, but I think you are missing two important cables from that set of parts.
1, the IR lead, probably the most important, were that white cable is with the 3.5mm jack on it there should have been a long lead with a 3.5mm plug on one end and the flat two pin connector on the other end. This allows the RNS-E to control the KCE-425 via the IMA.
2, the RCA AV lead, a RED/Yellow/White 3 way lead to connect the video output of the KCE to the inputs of the IMA, they are always missing from the kits and can be bought for a few quid easily enough.
Craig
Thanks for the advice. I thought the red yellow and white cable was missing. Didnt know about the other though.
Hopefully someone on her can put me in touch with an installer and ill order the extra cables.
I checked their website and thought it was compatible but ill have another look. (dont really know what im looking at TBH)
If you do go to swansea let me know, Im in Merthyr Tydfil which isnt far out of the way.
The cable your high lighting is the standard IR cable that comes with the KCE-425, it is not used in the installation with the IMA, but there is one in the box. So probably why it's also missing from your purchase. it is replaced by the first cable I mentioned in my reply.
I have fitted an IMA to a MK2 RNS-E and I also have the reverse camera IMA working with my own MK2 rns-e.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.