- Joined
- Dec 2, 2008
- Messages
- 17,400
- Reaction score
- 1,100
- Points
- 113
yep, im going to put a strategic dent wherever i can
Shouldn't need to mate.
yep, im going to put a strategic dent wherever i can
well i do, the heat shield touches it so im gonna smack the crap out of it till it ****s offShouldn't need to mate.
well i do, the heat shield touches it so im gonna smack the crap out of it till it ****s off
It makes sense, but i didnt fit it so only can see how to do it in my head lol. If you could get a pic id be greatfulYes mate I had to move mine away. What I did was get a mate to push the whole exhaust towards the passenger side of the car. Try to get 1-2cm of the DP hanger pushed outside the rubber on the mount then bang a small jubille clip on the end to stop it moving back over to the right. You'll only need a few mm to clear the tunnel.
I'll try and get a pic if this makes no sense.
Yes mate I had to move mine away. What I did was get a mate to push the whole exhaust towards the passenger side of the car. Try to get 1-2cm of the DP hanger pushed outside the rubber on the mount then bang a small jubille clip on the end to stop it moving back over to the right. You'll only need a few mm to clear the tunnel.
I'll try and get a pic if this makes no sense.
[/URL][/IMG] Not much space here
Is this on an S3? Mine looks different to that! The flexi bit is further round I'm sure. I'll get pics but wont be getting under my car for a week on Monday.
I had the Relentless downpipe and decat pipe fitted at the weekend, it was hard work getting the downpipe on due to the space available, but does go on, thou the decat pipe angle was way off when it was lined up, it was aiming over towards the passenger seat and not along the exhaust tunnel. Sadly it had to be grinded off and rewelded by my mechanic. (Sadly they did not take any pictures of this issue), but you can tell it was done by the quality of my mechanics welding over the good welding it came with(Will need to chase this up with Sam).[/URL][/IMG]
I have the Milltek non resonated cat back on mine and I have to say that the downpipe and decat does make it sound a bit tinny from inside the car, but nice from the back of the car on idle.
You do get a more sporty sound from around 3500k onwards, and yet it is pretty good on the motorway at a steady speed when the sound is noticable, but not annoying. Give it some throttle and it has a nice meaty sound.
Hoping the tinniness will die down a bit when I have put some miles on it.
oooooooo suits you sir, bbs sir, split rims sir, on ones boxter sir, oooooo, suits you sir!BBS RS Split rims on my Boxster.....lol
I'm waiting Karl......î Look forward to hearing from you very shortly.....î
no fking way!?I've put a red roof on it as well.... It's oozing Gayness from every orifice now mate...