Audi A5 3.0 TDI CAPA with hybrid (CAT still in place) 390hp / 800nm

bobby singh

BSR
VCDS Map User
Gold Supporter
Joined
Jan 21, 2013
Messages
1,326
Reaction score
1,245
Points
113
Location
West London & Windsor
Spec:
CAPA engine
Stock injectors
Sensors
Hybrid turbo - BSR custom CW, AMG turbine
DPF gutted but still has CAT

 
  • Like
Reactions: martinivw, Horia, desertstorm and 1 other person
Great results as always, Nice and clean as well. No smoke lots of poke. If I had left the cat on my car don't think I would have had the issues with oil use as the small amount of back pressure created by exhaust pulses being reflected back would have stopped that happening.
 
  • Like
Reactions: bobby singh
Thanks Karl - The oil leakage is down to many factors which I now know about.
As you know I had 426hp from a hybrid in 2017 but the leaks meant I couldn't sell them.
Did you have a 50mm ind on the compressor wheel?

If you wanted to get bit more out of it drop me a message anytime and I will do that for you.
 
  • Like
Reactions: Horia
@bobby singh thanks for the offer, Realistically I don't think I would notice another 10 or 15bhp and when Rick was mapping it we had it running 800Nm and I asked him to back it off to 750Nm to hopefully make the clutch more reliable. on 125K miles now and still running strong. Dependent on what the government does with diesels in the next 3 years or so I could be looking at a 2-3 yr old Bi Turbo 3.0 TDI S4 Avant. You could have a go at tuning that for me :) .
 
  • Like
Reactions: bobby singh