Hey all,
First thank you
@pns2007 for taking time to do this amaizing DIY tutorial!
Secondo I just did this on my Audi A4 B8 SE 2010 2.0 Remap Stage 1 TDI and I want to add a couple of extra bits for all of you out there that are planing to do this:
- Buy and use some proper trim tools - don’t use a screwdriver to prime the plastic trims.
- The clips from the door face are so damn hard to remove and I broken a couple of them and the plastic bits that holds them on the door face:
so try to be as careful as you can when you remove the door face.
- The rear door connector (as
@pns2007 explained) is different; it’s black with a red clip and in the next pic you can see (pointed by the red arrow) how to open it by using a very small screwdriver:
It has 16 pins in total and the positive/live wire goes into pin 12 and negative wire into pin 13:
I am sorry I forgot to take a pic after I inserted the wires.
- I bought and used these lights from eBay:
And two of this (they come 2 in a pac) from Amazon:
This is the result:
If it is really dark they will look even better.
Next will do the gloves box and in car foot lights and will come back with pics and info.
If anyone wants to do this but is afraid to do it himself I can help you with it, including coding and clearing errors after.
I leave in Northampton, drop me e message and will talk about it.
I can fit this and do coding for extra options too for Audi, VW, Skoda and Seat.
Cheers,
Andrei