anyone have or seen 19" rotors on a b6

P

passat16v

Registered User
Joined
Aug 12, 2004
Messages
216
Reaction score
19
Points
18
Been offered a set of 9x19" A5 rotors for my Speedlines.

The nicer concave ones. OEM .

Anyone have pics or already have them fitted
 
I would love to see these fitted to a B6 as the A5's ET is around 28 which would fill the arches perfectly.
 
Should be fine then.

I have ET32 on 8.5x18 and the wheels are flush with the arches, so a 9" wide wheel may have a little poke on the front
 
Mike.M said:
Should be fine then.

I have ET32 on 8.5x18 and the wheels are flush with the arches, so a 9" wide wheel may have a little poke on the front
Click to expand...
Ah OK. Well based on that the 9x19 ET33 will sit a further 4.4mm out compared to your 8.5x18 ET32.
 
These
12511587 1080663965301611 360151757 n
 
A little too much poke for me those Rota's, I used to run spacers that gave a little poke and all I succeed in doing was pebbledashing the lower doors and rear valance.
 
I would rather keep what you have and get the centres painted a silver or an anthracite colour
 
  • Like
Reactions: Northampton_ofn
I have the speedlines from an a5. Same offset, width and diameter.

I stuck 255 tyres on stupidly. They rubbed like a bitch. Don't go any more than 235. If lowered you'll probably want to remove the arch liner screw.
 
I run 20" gen Audi rotors with an et36 and 245 wide tyre without any rubbing at all and my car is about 60mm lower
 
You must log in or register to reply here.

Similar threads

matty18T
19" alloys on a b6
Replies
13
Views
2K
jimmyb592
jimmyb592
andy.l
Rotors on A4 (B6 chassis)
Replies
4
Views
1K
andy.l
andy.l
4
  • Locked
Anyone have an S4 wheel for sale? 18 or 19"?
Replies
1
Views
657
quattrojames
quattrojames
ruffrida
18's or 19's on your B6????
Replies
71
Views
26K
ruffrida
ruffrida
Duncan s4 b6
Anyone have a s4 b6 intake manifold for sale
Replies
10
Views
2K
s4mark
S
Top
Back