Yes, but VCDS cannot find rear door controller.have you tried going into the rear door modules on their own then?
Yes, but VCDS cannot find rear door controller.
Thanks
Thanks! Am popping out for a little bit but will jump on this in a couple of hours and post an update.Not sure how to post it TBH but if you PM me your email then I'll gladly send it to you.
@DJAlix Just sent my 09 Adaptation Map to you as had your email previously.
What's the part number for the rings beam?Apologies for the delay, i couldn't remember what Audi's stupid name for it was! Found it now.
All the information Audi have issued is in the PDF attached.
The price is quite steep i think for what is essentially an LED with a lens to cast the Audi rings as a shadow.
At least with it being an OEM accessory you'll know it's been fitted properly and that it's a quality part.
If anyone is interested i'm sure I can supply you with them, (i work at an Audi dealership so get discount on all parts) if you're local to me then I could even arrange a technician to fit them for you!
PS i wouldnt be charging anyone a 'middle man' fee, just trying to help out fellow forum members!
PM me
Audi Beam: a great accessory to make your car stand out
06 July 2015
A product that your customers will love
AU0643-15
Open the driver’s door and see the Audi rings projected onto the ground with the new Audi Beam accessory.
Customers will love this exclusive accessory, which uses bright LEDs to add a striking touch that truly makes a car stand out. It contains a pair of Audi rings replacement door lights which can be fitted to both the front and rear of the car.
Note: This accessory is only applicable on vehicles with option codes QQ1, QQ2 or QQ4.
Pricing:
- Dealer net £66.78
- RRP including VAT (excluding fitting) £91.58
- Cost of fitting at national labour rate £7.28
You can download a list of part numbers for specific models below.
Stock will be available to order at the beginning of September.
What's the part number for the rings beam?
4G0 052 133A
Loose the A for quattro
I have rings front and quattro back:-
http://www.audi-sport.net/xf/threads/audi-beam.255098/page-2#post-2599624
Sorry it's taken a while to reply guys, but this has me stumped as the needed Adaptations / Coding is not where I thought it would be after viewing a map with Factory Puddle Lights. Here is a link to my Lighting Configuration comparison sheet for those who are interested:
https://www.dropbox.com/s/41x0hl8axmhorjw/Door Lighting Retrofit Adaptations Project.xlsx?dl=0
*Am working on adding further detail
I have already fired and email over to VCP support to see if they can give me the needed information, but they are sooooooo slow in responding to requests. Am going to send an email over to RossTech also. Will update when I get some information.
I think I am wrong, a controller module will probably anyway located in the rear door but I think that It is not easy to access. Someone knows where it is located ?
thanks , for your very useful information. I was really confused.I think your pictures are of the window regulator motor. The control module should be located here :-
What kind of cable is this can you eventually send a picture ?I am located in ****, from the supplier who supplies the wiring kit. They copy from elsawin and have something like this
The pic in previous response 5Q 959 395 B is definitely the rear module, and Pin 12 is the power supply. The only problem is we need 5053/5054 cable to code the module to 'enable'
So are you saying that only VAS/ODIS can code this at the moment?I am located in ****, from the supplier who supplies the wiring kit. They copy from elsawin and have something like this
The pic in previous response 5Q 959 395 B is definitely the rear module, and Pin 12 is the power supply. The only problem is we need 5053/5054 cable to code the module to 'enable'
VAS 5054What kind of cable is this can you eventually send a picture ?
How easy is it to purchase 5054? I would like to get this mod working but I want to understand how retrofitters in the UK are able to fit the Led lights in the rear. Do they tap into a permanent live feed and that's it?5053 is the VCDS/VAGCOM that we have been using for AGES
5054 is the latest one using in Audi Service center, it's also called ODIS
If the whole car is base on UDS / CANBUS; I wonder why the rear module can be hidden from VCDS.....
There are tons of 'retrofit shop' in China helping ppl to retrofit their China made Audi with the German options, all of them saying the rear module must need 5054 to 'access' and code
How easy is it to purchase 5054? I would like to get this mod working but I want to understand how retrofitters in the UK are able to fit the Led lights in the rear. Do they tap into a permanent live feed and that's it?
Finally i get the rear doors wired.
+12V supply from power window wiring red-yellow and ground from door latch wiring brown-yellow
coding is not required the result is the same as the front doors
The light goes off when the door is closed.
View attachment 75407
View attachment 75408
View attachment 75409
I think that is the only option also for the inner door handle light in the back door.Anyone trying to install the inner door handle light?
I have got all the parts. I know the front will be connect to the module and do some VCDS coding
But as we don't have the rear module now, where should I connect? to the windows switch illumination?
@ming6068 The problem for the inner door handle light is that it must remain illuminated when the door is closed which is the opposite to puddle & warning lights. Thus wiring from the windows switch ground is not a good option.