A4 sline 2006 avant front spliter

Ads86

Registered User
Joined
May 28, 2013
Messages
42
Reaction score
0
Points
6
Location
NULL
Hi has anyone got any pics of a front spliter think they come off a cuppra or something are they hard to fit
 
got no pics to hand, but mine has one on and from being under the front end it looks like it just screwed/nuts+bolts holding it in place
 
ry6yqa4a.jpg
 
thanks every one so they can just be screwed in then underneath
 
so they can just be screwed in then underneath

I used pop rivets with washers placed on the inside of the bumper, for the rivet to grip against, also used heat gun to bend it into place to follow the contour of the bumper.
 
where do you get them from and are they just called a seat splitter. so are the really easy to fit. thanks
 
'Easy' is all dependant on how handy you are.....

Easier done on a ramp if you have access to one.

The central turrets of the splitter need trimmed down a little bit, watch you dont take too much off though.

Other than that, its really just self tappers in to the bottom of the bumper.

The part you want is the front splitter from a Mk1 Seat Leon Cupra R - you should be able to get one from your local Seat Dealer with this part number 1ML 805 903 - think they are coming in about the £45 mark at the moment.

First oen I got they had in stock there and then, second time they had to order it in for me. Both times they joked about the fact they never seem to sell them to Seat owners any more :)
 
Heres mine, did mine bout 18 mnths ago , still looks just as good now, i used self tapping screws and washers to fit mineImageUploadedByTapatalk1402070659908715
 
Hi Rastamouse & ESD1711

Could you tell me where you got your front grills from or if you made them yourselves please?

Thanks!
Stu
 
Hi Rastamouse & ESD1711

Could you tell me where you got your front grills from or if you made them yourselves please?

Thanks!
Stu

Hey stu,
Its a genuine rs4 grill. Was the first mod i did in the car, picked it up on ebay for £90 bargain!!!