Crickey ,that's 5 bags of portland cement extra in the engine bayMaybe the extra 100kg the engine adds has something to do with it
Sent from my iPhone using Tapatalk
Crickey ,that's 5 bags of portland cement extra in the engine bayMaybe the extra 100kg the engine adds has something to do with it
Sent from my iPhone using Tapatalk
The HR’s I looked at were for 3.0tdi Quattro only ,different product code for 2.0tdi tfsi etc
Sent from my iPhone using Tapatalk
Sorry my mistake ,the eibachs pro’s not the hr
Sent from my iPhone using Tapatalk
Someones been a busy bee.Unfortunately the car showed signs of PCV failure in the way home last night so ordered a replacement and gasket this morning. As expected the diaphragm in the pcv had split in multiple places...View attachment 239672
Whilst i was in the area i decided to take the opportunity to fit the new valve cover gasket that has leaked since buying the car. It was that dry and brittle it was like plastic.View attachment 239673
View attachment 239674
Then finished of with a little over due upgrade.
View attachment 239675
View attachment 239676
I was expecting it to be perished Rob but it was way worse than that. Had a right job removing it from the valve cover.Someones been a busy bee.
That valve cover gasket looks marginally better than what mine was like....lol, and they go crusty quite quickly aswell.
DV diaphragm looks like it's been leaking for a while Alex , one split looks older than the rest, good job done chap.
Calipers are top stuff Alex , great colour too, and with 18" alloys they look massive, really fit the rim void well.
making good progress now then.
ouch..Well… I’m pretty sure my A4 has a magnet for accidents.
Van driver though he could squeeze past me as I was about to reverse on to a customers drive… it’s not long been fixed since the sheep incident!!!
Hmmm… Not too much damage, but I think it’s a new wing and spraying to blend in.
Sent from my iPhone using Tapatalk
Its amazing!!! A whole different level of power!!!My DIY k04 build.
Got myself a S4 K04 CHRA, moved the internals to the k03 CHRA, Did some machining on the manifold, and now im ready to install. Wish me luck.
Sent from my RMX2170 using Tapatalk
Looks like you may have some of the troublesome washer James, another really common failure on b7's ( yet another one)
My driver side has random sticking session and doesn't always retract fully so needs a gentle bit of persuasion to get it back in ..lol
I had a TT for a short period of time. Looked very similar to yours. It was fun to drive but I wasn't super crazy for it. That will be a great upgrade to it though.I was going to fit them on my little old TT but i may swap over with the reds on the B7 old bus after I've given the yellow set a service.View attachment 241771
Redo the paint Job, it was done blindfolded...Picked up another set of calipers ,for a good price a bit on the bright side aswell, i had a plan in mind but not sure now..lol
View attachment 241765