milltek downpipe to standard catback s3 3dr

[s3chez]

Hi guys,

Im new to the forum recently purchased a s3 after selling my focus rs!

Already started with the mods which is a milltek decat downpipe and now im just searching for a reducer to fit it to my standard downpipe.

Can anyone point me in the right direction

Thanks in advance - Connor.

 

[nluk100]

You need a 3" to 2 1/2" reducer - took me a while to find the correct one for mine.

 

[s3chez]

You need a 3" to 2 1/2" reducer - took me a while to find the correct one for mine.

Where did you find one in the end mate?

 

[Scoot Yo]

This is exactly what I am doing for now as well, eBay have them. Otherwise you could go to an exhaust fabricator and get them to do you one.

 

[ahtcap]

I've used EBay member (everyexhaustpart) .good service all-round.

 

[nluk100]

You may need to buy the Milltek connecting pipe too as (it was 2 years ago now!) the original DP is longer than the Milltek DP - best to check this before you turn up at the exhaust fitting place. The Milltek part number is MSAU343.

 

[s3chez]

You may need to buy the Milltek connecting pipe too as (it was 2 years ago now!) the original DP is longer than the Milltek DP - best to check this before you turn up at the exhaust fitting place. The Milltek part number is MSAU343.

yeah I realised that yesterday so got one on order cheers

 

[Marshy]

I've used EBay member (everyexhaustpart) .good service all-round.

Used these to connect my Cobra downpipe to my Milltek cat back.
Excellent service

 

[s3chez]

Used these to connect my Cobra downpipe to my Milltek cat back.
Excellent service

Cheers guys much appreciated

 

[s3chez]

I've used EBay member (everyexhaustpart) .good service all-round.

any idea what length you went for?