Hi Nathan, nice addition fella. Am wanting to plug in a kufatec harness into the rear of my rnse to enable the aux output. Would you be able to remove the rnse for me to enable me to plug the harness into.
Nice work Wrath, is it difficult to do? i.e swap the internals?
lol ....love itOr..... just buy a seat exeo unit.
Or..... just buy a seat exeo unit.
the 2010 onwards RNS-E have several other additions, you can use AMI if you want (allows proper Ipod integration! albeit it at another £400 for the AMI unit), faster processors, the older units are much slower!! also you get the nicer chromed buttons which freshen it up loads!! and of course the 32gb SD slots...... all in all a better unit than the older model
I can feel the pain having taken one of these apart myself - my unit on delivery didnt light up in the dark, so had to strip it down and eventually found a bent pin.....sooo nerve racking when you see all the screws on the table
Abb, if you follow the diagram on the RNS you'll see its easy enough to wire in the Aux yourself, 3 wires iirc...save spending pointless cash on Kufatec and their silly dreamt up postage costs
Not true, I've got a 2006 B7 RS4 to which I've retrofitted a 2010+ RNS-E and AMI , see this sticky thread in this forum http://www.audi-sport.net/vb/audi-s4-a4-a4-cab-b7-chassis/157429-ami-b7.htmlAMI wont work
Not true, I've got a 2006 B7 RS4 to which I've retrofitted a 2010+ RNS-E and AMI , see this sticky thread in this forum http://www.audi-sport.net/vb/audi-s4-a4-a4-cab-b7-chassis/157429-ami-b7.html
Sorry, I should have made that point as well.in fairness it was a full year after it was discussed