I followed the instructions on checking for leaks. block 32 monitored after clearing fault codes (there were none), but it zeros the 2 initial readings for block 032.
anyway, started the car - left it idling for a couple of minutes until it settled (that didn't take too long) and the figures were still spot still at zero percent.
I then revved upto 3000rpm and my maf reading was: 12.5 to 12.72
I read that at 3000rpm maf reading should be 10g/s, obviously mine is higher - what does that mean - is there anything to be concerned ab0out ?
My S3 is standard mechanically.
anyway, started the car - left it idling for a couple of minutes until it settled (that didn't take too long) and the figures were still spot still at zero percent.
I then revved upto 3000rpm and my maf reading was: 12.5 to 12.72
I read that at 3000rpm maf reading should be 10g/s, obviously mine is higher - what does that mean - is there anything to be concerned ab0out ?
My S3 is standard mechanically.
Last edited: