RNS-E coding help please

[Matt268uk]

Hi Everyone

Wondered if anybody could help witha coding issue. I fitted my rns-e unit and then wanted to enable the aux. That went ok and now just need to move one wire to a different pin to hear sound. My issue is after i ran a scan just out of curiousity and this came up. tried clearing it but came back immediately, maybe if anybody know what coding needs to be done to clear the fault.

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 192
Mileage: 236923 km
Time Indication: 0
Date: 2016.04.26
Time: 16:49:25

Address 56: Radio Labels: 8E0-035-192-RNSE.lbl
Part No SW: 8P0 035 193 G HW: 8P0 035 193 G
Component: RNS-E PU EU H06 0200
Revision: 0000012S Serial number: AUZBZ7LD217253
Coding: 0205151
Shop #: WSC 06314 000 00000
VCID: 3460BB5C57FBCB9EAA-8060

3 Faults Found:
00862 - Antenna for GPS Navigation (R50/R52)
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 5
Fault Frequency: 1
Reset counter: 192
Mileage: 236923 km
Time Indication: 0
Date: 2016.04.26
Time: 16:49:32

Freeze Frame:
Mileage: 236960 km
Count: 2704
Clock: 19:35

00858 - Connection; Radio Intermediate Frequency (IF) Output to Antenna Amplifier
007 - Short to Ground
Freeze Frame:
Fault Status: 01100111
Fault Priority: 5
Fault Frequency: 1
Reset counter: 192
Mileage: 236923 km
Time Indication: 0
Date: 2016.04.26
Time: 16:49:42

Freeze Frame:
Mileage: 236920 km
Count: 2604
Clock: 16:49

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 192
Mileage: 236923 km
Time Indication: 0
Date: 2016.04.26
Time: 16:49:25

 

[lgooch]

Moved 1 wire ? You need to move 3if I recall.

Have you got the new plug for the back of the rnse ?

 

[Matt268uk]

I was reading a thread on here and thought I could use the plug I already had ad just move some wires.

 

[lgooch]

Not if you want aux in as well. You have to buy a 32 pin plug which sits in a separate socket on the back of the unit

 

[lgooch]

Http://http://audiretrofit.quinlivan.net/rnseauxin

 

[lgooch]

http://audiretrofit.quinlivan.net/rnseauxin

 

[lgooch]

All in the link my friend. Make sure you have the coding correct for the options on the car. You will always have the antenna fault as its a retrofit.

 

[Keram]

Retrofitted RNS yesterday, had all the same faults. At the end of the day, as was said, only antenna fault remained.

 

[Matt268uk]

Thanks for the link and info @igooch. If I already have the aux socket by my hand brake can I just remove the pins from my existing quad lock and put them into a new 32pin plug ? If so what's the best way to remove pins from existing plug, I know how to get the plug apart just not sure how to remove pins. Thanks again.

 

[lgooch]

Correct. Just follow the wiring diagram on the top of the old stereo and remove the correct pins. I used a straightened paperclip

 

[Matt268uk]

Perfect, thanks for your imput.