Parking sensor replacement

[MattyNutt]

Hello guys.
Looking at replacing my rear parking sensor today ,on my driver side at the end.
Can someone advise me the best way to tackle this . Not many videos online on this.
I am good with my hands so wont be a problem.
But the best way to tackle would be appreciated.
Thanks

 

[EXSpartan36]

Its a pretty straight forward job. I've nicked this from another thread. Once the bumper is off the sensor should just unclip.

Remove boot floor.
Remove boot sides, disconnect 12v socket from right side.
Remove mud flaps if fitted.
Unscrew large plastic extended screw and remove light cluster each side.
Remove the grommets in panel in boot below light cluster to reveal 1 nut each side, remove nut taking care not to drop it inside.
Remove 3 fixings around wheel arch, 3 torx and one trim pin fixings on lower edge and one plastic pin hidden behind each light cluster.
Unplug reversing sensor wire in right side compartment, it passes through a hole to bumper.
Pull bumper sides outwards from wheelarch and remove bumper, feed sensor wire out of hole.

 

[MattyNutt]

Excellent. Thanks . All done and working.
Very straight forward.
Thanks got you help.