marks in paint

2.8 30v

Registered User
2014-06-08150328-1_kindlephoto-122944695.jpg
Has anyone got any idea how to get rid of these marks
 

minty86

Registered User
Ahhhh got that same problem on my car. It a paint chip and only option is get professional done but I rather wait for any major scratch on it then i get full wrapping :D :p
 

ROB A3 Quattro

no smoke without poke
Hmm what is that bird crap maybe a gd cutting compound then polish out, failing that then machine polish is needed:yes:
 

2.8 30v

Registered User
I have machine polished it before got it a little better I've just got some new pads so will give it another go
 

Mike_S

Registered User
I'd start with 1500 grit, then refine with 2000. Depending on the outcome of that i would either refine further with 3000 or move on to cutting compounds and pads to buff.

Be very careful bud, and allow plenty of time.





<------- have a look here as I've just done one side of my A4. (1 full day to do, and it's still not perfect in my opinion.)
 

Brodster

Registered User
A good session with a polisher and some good products normally get rid of stuff like this as Audi paint is relatively thick with a good clear coat.
 
Top