- Joined
- Sep 4, 2003
- Messages
- 29,115
- Reaction score
- 3,862
- Points
- 113
- Location
- Solihull, Midlands
- Website
- www.audi-sport.net
HELP, anyone got any experience changing one of these?
OK, I'm stuck, I have a copy of Haynes manual to hand, and even downloaded a reasonable detailed text instructions from Clubgti forum to attempt changing this.
I have the interior in bits and have got hold of the airbox where the heater matrix resides, my problem is getting the stupid thing to line up and back on after replacing the matrix, anyone got any tips, as I spent the best part of 2 hours(with a break every 5 minutes!) trying to get it back on... the lower stud I have lined up through the hole in the bulkhead, but the upper one won't go anywhere near the hole... Any help is appreciated.
Joe
OK, I'm stuck, I have a copy of Haynes manual to hand, and even downloaded a reasonable detailed text instructions from Clubgti forum to attempt changing this.
I have the interior in bits and have got hold of the airbox where the heater matrix resides, my problem is getting the stupid thing to line up and back on after replacing the matrix, anyone got any tips, as I spent the best part of 2 hours(with a break every 5 minutes!) trying to get it back on... the lower stud I have lined up through the hole in the bulkhead, but the upper one won't go anywhere near the hole... Any help is appreciated.
Joe