Fault codes Audi b8

[Rfclowry]

hi I have 2 fault codes if anyone could please help. As i have the engine management light on And anternative engine management on ( when glow plug lights flash when driving) the codes are P1588 00 (044) open circuit and throttle position sensor (g69) P0122 00 (175) signal too low. Any ideas on the part I need to fix these and any other information would be very helpful. Thank you very much for your time

 

[The Jargen]

Which engine? Most likely the throttle body is dirty.

 

[Rfclowry]

Thank you for fast reply. Sorry it’s the 2008 2.0 143 tdi engine

 

[The Jargen]

Check the throttle body first, it might be coked up.

 

[Rfclowry]

Check the throttle body first, it might be coked up.

Great any idea about the code p1588. Any mount solonoid ?

 

[The Jargen]

Great any idea about the code p1588. Any mount solonoid ?

Like the name implies, its most likely a fault with the engine mount solenoid.

 

[Rfclowry]

Like the name implies, its most likely a fault with the engine mount solenoid.

Yes bought one and it took code away. Also bought new throttle body and that took the position senor coee off